The Lumi 200 II 400Ws Twin Kit with Trigger has been created to be adaptable and suitable to a wide variety of photography industries entry-level home studio use and suitable for both the serious or amateur photographer. It can also be a great starter when moving from speedlite to studio flash, as the Lumi 200 II Flash unit offers around 3 times more power output than a flashgun. This kit consists of 2x LUMI 200 II Flash Head Units which have every feature you will need from a studio flash such as a built-in receiver, slave mode, fast recycling time and flash duration. It’s also part of THE ONE SYSTEM, which you can mix and match with any other flash in the PIXAPRO range. Also included are 2 x light weight and durable 240cm Air cushioned Stand, 1x 60x90cm Rectangular Softbox to diffuse and soften light, a 40” Translucent White Umbrella which will provide an even, soft wide light spread, 2x150W Modelling Bulbs, 1x 7" Reflector and a Pro AC Wireless Trigger to control your flashes remotely without the need of having to manually adjust settings on the flash units, all provided in a practical, portable Rolling Case for easy storage or taking out on to a location. This kit has been created to be adaptable and suitable to a wide variety of photography industries including portrait, fashion, beauty, product, commercial and many other types of flash lighting setups.
Flash Duration: Boasts a flash duration of up to 1/2000th of a second giving Short flash durations for sharper images and stopping motion.
Fast Recycling time: Just over one second allows you to take more frequent shots also featured is a programmable ready beep sound when the flash is ready to make the next flash.
Power Range: 6 f-Stop Power Range - 1/1-1/32 power in 1/3 or 1/10 Stop Increments (With Supported Flash Triggers)
Modeling Bulb and Lamps: comes supplied with a bright, High quality 150w modelling lamp, and a 200Ws flash tube, that has a 6-stop power range (1/1 – 1/32 power) which can be adjusted in 1/10 of a stop increments.
The One System: can be used with any other Flash unit in the PIXAPRO range.
Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speedlights or any other TTL strobe.
Compatible Accessories: Compatible with a wide range of S-Type Accessories and Modifiers.
Built in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System)
3.5mm sync jack: allowing it to be triggered by a sync cable, or other radio triggering systems.
Shape: The rectangular shape helps to emulate a natural window light giving a more uniform effect, great especially for portraits and commercial photography and also useful when used as a fill light.
Highly reflective interior: Helps to bounce the light around for maximum light efficiency, also the black exterior material in line to reduce the light spill.
Two layer Diffusion: Helps to create a more even coverage of light giving you more control and helping to further reduce harsh shadows.
Interchangeable fitting: a unique design which allows it to be used with a wide variety of different flashes meaning you can use this on almost any flash on the market (Comes supplied with an S-Type ring).
3 Tier Extension: making it collapsible to a height of 75cm and fully extend to 240cm.
Air Cushioned Dampening System: this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.
Thick Sturdy Central column: can be lowered down to be used as a fourth leg, offering extra stability.
Detachable Spigot: Comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.
Translucent-white Nylon: High quality Nylon has been used for Durability and the white colour Produces soft, wide-spread light, ideal for lighting large areas.
Lightweight Eight-Spoked Metal Frame: comes with an 8mm shaft for allowing it to collapse to a compact form for easy transportation and for a quick and easy set up.
Universal: Can be mounted to any studio lighting fixture that can take an umbrella.
16 channels: ensuring you will have no interference or interfere with others Devices, while also allowing you to control in groups or individually.
Up to 50M working Distance: As it uses radio waves it does not require a direct line of sight with your flashes for them to work, allowing you to work at greater distances (up to 50m) from your flash, giving you more flexibility.
Padded Interior: Providing maximum protection for your equipment, and can be divided into up to six compartments.
Strong Carry Straps: fixated around the bag to ensure that you can move the roller case around when using heavier equipment.
Large Castor Wheels: comes with two wheel so it can be used to wheel the case around making it easy for using on location or just travelling across town to shoot an event.
The LUMI200 Twin kit includes everything that you need to start shooting in your studio. The 2x 200Ws flashes are sure to give sufficient power for almost any situation and can easily be controlled via the wireless trigger, offering fast and easy setup and use. The two air cushioned stands will provide a stable platform to mount your lights and including the softbox to emulate natural window light and the umbrella to offer a wide spread diffused light, it includes everything you need. The kit can also be packed away in the included roller case to make transporting the kit just as easy or even putting it away in storage. It is the best introduction to studio flash and is ideal for portrait, fashion, beauty, product, commercial and many other different types of flash lighting setups.
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
|Max Power (WS)||200Ws|
|Guide Number||49(m ISO 100)|
|Colour Temperature||5600 ± 200K|
|Power Output Control||OFF, 5.0~8.0 （1/32~1/1）|
|Modelling Lamp (W)||150W|
|Triggering Method||Sync cord, Test button, Slave triggering, Wireless control port|
|Dimensions||Flash diameter Φ12.5CM, height of flash with handle 25CM, length of flash with lamp cover 35CM|
|Net Weight||Approx. 1.8kg|
|Accessory Mount||Bowens S-Type|
Free UK Standard delivery on orders over £150.00*
|Order Date (if received before 3pm)||Cost||Latest Expected Delivery Date|
|UK Saver Delivery (Orders over £150*)||FREE||2-3 Days|
|UK Saver Delivery||£5.00||2-3 Days|
|UK Next Working Day||£8.00||Next Working Day|
|UK Before 2pm Next Working Day||£18.00||Before 2pm Next Working Day|
|UK Saturday Delivery||£30.00||Saturday|
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country..
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Our new price match policy guarantees you the same price as other retailers so you’re alway getting the best deal possible...
The comparison needs to meet the following:
These flash heads look extremely sturdy and very well made. The stands are heavy duty and it all looks like it will last for many years. Excellent quality all round. Haven't had a proper chance to use the setup yet as we're having work done to the studio, but I have seen some videos and i'm sure they're going to be great
Great lighting kit, all well packaged and secure. Stunning results and can not wait to expand my photography using this kit
Not long had the kit so can't truthfully say how it performs yet. Out of the box, setup was easy, triggers worked fine. Strobes have a quality feel to them being alloy bodies rather than the plastic one I've seen. Time will tell but first impressions are very good.
I bought a set to suplliment my exsiting studio lights, I find I use them more as they are more user friendly, and better built Highly recommended
I chose this flash kit as it seemed like a good value kit for a studio flash novice. I have only used it once to try the flash heads and from the quick use I'm impressed, good solid heads and brackets with soft box and umbrella, everything to get you started. The instructions could be better ( had to YouTube) and the soft box is a pain to assemble and I gave up trying to dismantle it but I will probably but the umbrella type of soft box. Other than that I would definitely recommend it for an introduction to studio flash photography.