PiXAPRO
LECO500S II LED Daylight Balanced LED Panel (Improved Colour)
-
CRI 96
-
Daylight Balanced
-
100% - 10% Dimmable
-
Wireless Remote
-
Sony NP-F Series Battery Compatible
The PIXAPRO LECO500S II is a user-friendly 36W 5600K Daylight- Balanced LED Light Panel, suitable for both stills and video. It can be powered from the mains, or two Sony NP-F Series (a.k.a. L series) rechargeable batteries. The LECO500S II features 600 bright LEDs, with a CRI (Colour-Rendering Index) of 96 for accurate colour reproduction, which makes it suitable for professional broadcast use, as well as for cinematography and smaller productions. The LEDs are also Flicker-Free, meaning you can shoot a virtually any framerate, or any shutter-angle without fear of introducing flicker.
The LECO500S II features a smart-passive cooling system, which efficiently dissipates heat without the need for cooling fans, which make the panels Noise-Free, which is great for situations where you need to simultaneously record clean audio during your shooting session.
The LECO500S II features a lightweight and durable aluminium-alloy housing along with a manual yoke to enable you to position your light in virtually any position you require. LECO500S II also comes with a set of removable metal Barn Doors, which gives you the ability to control the angle of the beam. The barn-doors also protect the LEDs from damage during transit.
The LECO500S II panel can be powered by either an AC mains adapter (included) or powered via two Sony NP-F Series batteries (available separately or included with battery bundle options). This makes the LECO500S II ideal for photographers and videographers who shoot both in the studio or on location.
The LECO500S II comes with a Wireless 2.4GHz remote control, which enables you to control the brightness of up to 99 units simultaneously at distances of up to approximately 30m.
The LECO500S II is the perfect light for YouTubers, Cinematographers, Chroma Key green screen as well as for photography. Whether you’re a seasoned professional, an enthusiast or a beginner, the LECO500S II is a great addition to anyone’s arsenal.
- High CRI rating of 96
- Lightweight & Compact
- Features 600 Premium Quality LED Bulbs
- Wirelessly Control the Brightness
- Approximate life of 50,000 hours
- User-Friendly Controls
- Built in 2.4GHz Radio Remote Receiver
- Can Be Powered by 2x Sony NP-F970 (or NP-F770) Rechargeable Lithium-Ion Batteries
- Mounts to any 5/8” support devices including stands, booms and Hi-Glide fittings.
- 1x LECO 500S II LED
- 1x Remote Control
- 1x Power Adapter
- 1x Grip Handle
- 2x NP-F750 Batteries (Option 2 Only)
Specifications
| Max. Output Power | 36W |
| Colour Temperature | 5600K |
| CRI | 96 |
| Number of LEDs | 600 |
| Luminous Flux | 4,320 lm |
| Brightness | 9,032 lux |
| F-Stop (at 1m) | Approx. f/3.6 (1/80 Sec @ ISO 100) |
| Beam Angle | 45° |
| Power Range | 10%-100% |
| DC Power Input | 13 ~ 19V |
| Power Adapter | DC 15V 2.4A |
| Battery Plate | 2x Sony NP-F750/970 |
| Remote Frequency | 2.4GHz |
| Remote Range | >50m |
| Number of Channels | 99 |
| Dimensions | 242mm x 191mm x 42mm |
Videos
Q&A’s
- 'LO' stands for low power protection mode. This means the light has not been supplied with enough power, which would usually happen when using the light with batteries. It is very unusual it shows when using mains power. However, if it does show with mains, we usually suggest to change the power cable or the port where you are plugging the cable into.
The single colour version of this light will only operate on 5600K, it will not allow you to change the colour temperature of the light, only the brightness.
On the display, the numbers should show as 56 and then 2 other numbers that can be adjusted. The 56 stands for the colour temperature of 5600K. If you turn the dial the last two numbers will change which should adjust the brightness of the light.
- I can confirm that the LECO500 panels will keep the previous settings when turning off the unit which can be helpful if you being used in a difficult to access or fixed position.
Got a question of your own?
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a questionDelivery & Returns
UK Delivery Rates
Free UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
Returns
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 30 working days for a full refund of the purchase price of the goods.
International Delivery Rates
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
PIXAPRO® LECO500S II LED Daylight Balanced LED Panel (Improved Colour)
Great value and quality build for the price. I love the fact that it's portable so I can now shoot anywhere without having to worry about power. Very useful light, nice and bright.
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.