OBSBOT Tail Air AI-Powered Camera with Clamp & Adjustable Arm

The OBSBOT Tail Air AI Human-Tracking Camera with Clamp & Adjustable Arm provides two unique mounting methods to position the camera to make sure that perfect results are captured. The OBSBOT Tail Air is an AI-Powered PTZ 4K Live-Streaming Camera, that features a Large 1/1.5” CMOS Sensor enabling it to capture Ultra-Sharp 4K Footage with Vivid Colours, as well as Unrivalled Tracking Capabilities to accurately track the subjects’ movements. The first mounting method would be with the LSA-03 Convi-Clamp which can be clamped to any surfaces between 8-55mm using a highly robust jaw mechanism. The second mounting method is by adding the LSA-04 Magic Arm to the LSA-03 Clamp, which features three articulated joints to provide a wider range of positioning options. The OBSBOT Tail Air AI Human-Tracking Camera with Clamp & Adjustable Arm Kit is suitable for Live Streaming and Video Conferencing needs.

OBSBOT Tail Air Webcam

AI Auto Tracking: Uses AI to automatically track moving subjects, enabling you to stream freely, without having to worry about accidentally going out of frame. The OBSBOT Tail Air 4K live-streaming camera can accurately track humans and animals, and it even features object tracking at speeds of up to 120°/s.

4K Streaming Performance: High-quality prime lens is made up of 8 lens elements, combined with a large 1/1.8" CMOS sensor, enabling it to capture high-resolution 4K footage.

Excellent Low-Light Performance: 2μm pixel size and ƒ1.8 aperture, the OBSBOT Tail Air AI human-tracking camera has exceptional low-light capabilities. This enables it to capture high-quality video, with reduced noise, enabling you get create results, even when the lighting conditions aren’t ideal.

Gesture Control 2.0: A set of intuitive hand gestures, designed to help simplify and streamline your video shooting experience. You can control various operations such as Zooming, starting and stopping recording, locking and unlocking focusing targets, etc.

AI Director Grids: Uses its AI algorithm to automatically divide captured video into grids in real time. You can quickly and accurately evaluate your live stream by pressing on the corresponding section of the video on the grid by clicking on a grid whilst you’re on air.

Seamless NDI Connectivity: Network Device Interface support with NDI|HX3, providing you with higher quality and low-latency live streaming video via Wi-Fi and Ethernet.

Supports Multiple Connections: It can be connected via either USB Type-C, micro-HDMI, or PoE-supported Ethernet cable, enabling the OBSBOT Tail Air AI human-tracking camera to be seamlessly integrated into your existing live streaming setup.

Wireless Connection: Can be controlled and as well as present a real-time video signal on your mobile device, making your streams a more streamlined and intuitive experience.

Obsbot Start App: Using its simple-to-use interface, you can start your live stream in real-time from anywhere and adjust the image settings as and when needed during the stream. The App enables you to customise your image settings before or during your livestream and apply them instantaneously.

LSA-03 Convi-Clamp

Robust Clamping Mechanism: Highly robust jaw mechanism can be securely clamped onto any pole or flat surface or pole anywhere between approximately 8mm and 55mm in thickness. It comes with a removable wedge-shaped rubber saddle, designed to increase the surface area of the clamp when attaching it to a flat surface, increasing its grip strength.

Hex-Stud Receiver: Allows it to accept a plethora of studio grip accessories that feature a hex-stud mount, such as spigots, j-hooks, extension arms, etc. Its hexagonal design prevents the accessory from rotating, allowing for a more sturdy and reliable connection. It can also accept traditional round 5/8-inch studs and spigots, increasing its versatility.

Ratchet-Styled Handle: Provides more leverage, enabling you to tighten the nano-clamps grip with less effort.

Spring Lock Safety Mechanism System: Preventing your accessories from falling out of the clamp should the winged-screw locking screw get accidentally loosened.

LSA-04 Magic Arm

Controlled By A Single Hand-Wheel: To adjust the magic arm's position, simply loosen the hand wheel, move the arm to the position you require, then tighten the hand wheel again, to lock everything in place.

High Load-Capacity: Can withstand load capacities of up to 3kg, making it the perfect tool for photographers and filmmakers alike. This allows them to mount their equipment safely and securely.

Friction-Controls For Extra Precision: Special friction discs with anti-slip rosettes to prevent movement whilst in use. Its large, rubberised hand wheel can be turned slowly, gradually increasing friction until all three joints are fully locked into place, making precise positioning a breeze.

360° Rotating Elbow Joint: This adjustable angle gives you the precise control to achieve your desired positioning, providing creative flexibility to make the most of your camera angle.

360° Ball Joints With 5/8” Stud: Features a 5/8” stud, attached to a ball-and-socket joint at either end of the arm. This enables them to be rotated in a full 360° and can be angled to 90°. Each metal stud also features one flattened side, preventing your light or other equipment from rotating on the stud itself.

1/4” And 3/8” Female Threads: Each of the two 5/8" studs features a female screw thread (one of which is a 1/4"-20 thread, and the other is a 3/8"-16 thread), for mounting onto various studio grip accessories, or for mounting accessories to it.

The OBSBOT Tail Air AI Human-Tracking Camera with Clamp and Adjustable Arm is ideal for any video creation that requires a range of different mounting options to capture the perfect angle.

For more information on the products included within kit, please see the links below:

Tail Air Webcam

LSA-03 Convi-Clamp

LSA-04 Magic Arm