The PIXAPRO Heavy-Duty Reclined Boom Stand is a Super-Durable Professional Boom Stand, designed for use in the studio. Made from Cast-Iron, this stand has been built to endure the daily rigours, of the busy professional photography or video studio. With a load capacity of approximately 10kg, The PIXAPRO Heavy-Duty Reclined Boom Stand is perfect for use with heavier lighting and modifier combinations. The boom is perfect for positioning your lighting overhead or placing them into positions not possible with traditional lighting stands. The angle of the lights on the boom can be easily adjusted from ground level using its unique crank-handle mechanism, eliminating the need to lower your light, or to stand on a stool or ladder. This is the perfect stand for a professional studio-based portrait, commercial, beauty, fashion, product, food, photographers, or videographers.
The Heavy-Duty Reclined Boom Stand has been designed from the ground up, to meet the demands of working professional studio photographers and videographers everywhere. Made from highly durable cast iron, the Heavy-Duty Reclined Boom Stand can take loads of up to 10kg. This makes this stand perfect for use with heavier lights, or larger modifiers.
This stand features a Two-Sectioned Cast-Iron boom arm, that can be extended between 150cm and 260cm, making it great for positioning your light centred above or below camera position without the stand main central column getting in the way. Perfect for use hair lights or for clamshell and butterfly (Paramount) lighting setups.
The Heavy-duty Reclined Rotatable stand features a Crank-Handle at the back of the boom, enabling you to adjust the angle of your light from ground level. The crank handle is connected to the spigot holder via a series of gears and shafts, to enable you to adjust the angle of the light, without needing to lower the boom arm or stand on a stool or ladder.
The PIXAPRO Heavy-Duty Reclined Boom stand ships with a standard 5/8” spigot with 3/8”-16 thread at one end, and a 1/4”-20 thread at the other. The Spigot also features one flat side for a greater grip surface. This prevents your lights or accessories from rotating whilst in use.
The Boom mechanism is all supported by a rugged Cast-Iron Stand with a 1-1/8-inch Junior-Pin Receiver built into the top of it. The stand has a minimum working height of 150cm and can be extended up to a maximum height of 2.35m. Perfect for positioning your lights high above your subject
This stand also features smooth-rolling caster wheels which allow you to effortlessly manoeuvre with the stand around the studio. Each caster features independently locking brakes, enabling you to lock the stand in place, so that it doesn’t move once it is in position.
The Heavy-Duty Reclined Boom Stand ships with a 5kg pre-filled sandbag, designed to counter-balance the weight of the lighting at the other end of the boom to prevent the stand from tipping over. This heard-wearing sandbag is made from heavy-duty canvas material, filled with metal ball bearings.
The Heavy-Duty Reclined Boom Stand comes in two main parts, allowing the boom arm and the main stand section to be separated. The legs of the main stand can be collapsed down, enabling the stand to take up very little storage space.
The PIXAPRO Heavy Duty Professional Reclined Boom Stand is an essential addition to any busy professional photography or video studio. Built to withstand the daily rigours of a professional studio, ensures that these stands will last you a very long time. The ideal stand for positioning your lights directly above your subject, or in positions not normally possible with traditional light stands. Perfect for use with hair lights, for use as part of clamshell or butterfly (or Paramount) lighting setups.
|Min Height||150 cm|
|Max Height||235 cm|
|Stand Weight||21 kg|
|Arm Length||150 cm ~ 260cm|
|Maximum Load||Approx 10 kg|
|Stand Colour||Black Finished|
|Attachment||5/8" Spigot on Stand, 1/4" and 3/8" Spigot On Boom Arm|
The current batch of boom stands, require an Allen key (included) to secure the boom to the stand. (Please see the Photo Below)
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.Ask a question
Free UK Standard delivery on orders over £150.00*
|Order Date (if received before 3pm)||Cost||Latest Expected Delivery Date|
|UK Saver Delivery (Orders over £150*)||FREE||2-3 Days|
|UK Saver Delivery||£5.00||2-3 Days|
|UK Next Working Day||£8.00||Next Working Day|
|UK Before 2pm Next Working Day||£18.00||Before 2pm Next Working Day|
|UK Saturday Delivery||£30.00||Saturday|
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...Check your country
Pixapro products are used by