PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON) | Essential Photo | Photographic lighting and equpiment
4.91 / 5.00 of 412 essentialphoto.co.uk customer reviews | Trusted Shops

Checkout Shopping Cart
0 Item - £0.00

Specialist in studio lighting equipment and accessories for the Digital, Film and Video industries
Free Delivery on orders over £150

PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON)

Product Code: A-030302   Availability: In stock
was £469.99
Now £325.00 inc. vat

Order Securely Online

100% Security Protected Payments
Next day delivery available
30 Day No Quibble Returns
UK Stock (no grey imports)
Buy online now
Add to Basket

We ship internationally too

Product Information
Description

To see a behind the scenes shoot of Photographer Barry Mountford using the HyBRID360 Flash to photograph a miniature scene, please see the video below;

To see a behind the scene shoot using the HyBRID360 and LUMI400 Flash by Tommy Reynolds please see the video below;

The PIXAPRO HYBRID360 ETTL is an ETTL II compatible Portable Bare bulb Flash, which gives you access to powerful flash with a guide number of 80m at ISO100 with the standard reflector attached (which is a similar to some studio strobes), but with the size and portability similar to that of a speedlite. It is powered by a Pixapro PowerPack Dual Output battery pack, which will give you approximately 450 full-powered shots per charge, and recycling times of between 0.05 and 4.5 seconds. It features a user-friendly interface, with a large Dot-Matrix LCD screen with large, easy to access buttons and a control dial, which allows you to quickly and easily adjust your flash settings.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash with flash durations between 1/220 second to 1/10,000 second (dependant on flash power output) which opens up a whole world of possibilities. The PIXAPRO HYBRID360 ETTL Bare bulb Flash also features a variety of different flash including a High-Speed Sync mode (up to 1/8000 sec), Second-Curtain Sync, Flash-Exposure Compensation, and Flash Exposure Bracketing (up to ±3 stops). It also includes a multi-flash mode, which can be set to between 2 and 100 flashes at a frequency between 1 and 199Hz (flashes per second), which allows you to create many different effects such as stroboscopic photography.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash features an integrated 2.4 GHz radio transceiver that can be used to command other Hybrid360 ETTL flashes, as well as Hybrid360 ITTL flashes off camera. Both the Hybrid360 ETTL and the Hybrid360 ITTL feature each other’s receiver technology, and will automatically switch between the two, depending on which Master flash the signal is received from. It can also be used in conjunction with the ST-III TTL-C flash triggers which will extend its range from the already impressive 70m to up to a working range of 100m in an open area. The PIXAPRO HYBRID360 ETTL Bare bulb Flash also features Canon’s Optical Wireless Master & Slave Modes.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash is also compatible with the PIXAPRO® ST-I 16 Channel Radio Speedlite Trigger set, allowing you to trigger your flash, and control the flash power remotely from the transmitter, (Pro ST-I Trigger does not transmit TTL information) enabling you to use the PIXAPRO HYBRID360 ETTL in conjunction with the flashes in the Pixapro Eco-System including the PowerCore Portable Flashes, the Li-Ion580 series speedlites, and the Lumi, Storm and Kino studio strobes. The Hybrid360TTL’s hot-shoe can be swapped out for a standard ¼ thread when being used off camera, enabling you to mount to any tripod, light stand or boom arm without the need for added accessories.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash is perfect for the both amateur and professional photographer that needs the portability and convenience of a TTL speedlite, with the power similar to that of a Studio Strobe.

 

Features

  • High Guide Number of GN80 (at ISO 100 with Standard Reflector)
  • High Speed Sync mode up to 1/8000th
  • Comes with an adapter to enable you to switch out the hot shoe for a 1/4inch thread when used off camera.
  • Integrated PIXAPRO 2.4GHz ST-III Radio Transceiver System
  • ETTL & ITTL Radio Slave Mode (Auto Switching)
  • Range – 70m+ working range (extended to 100m with ST-III as commander)
  • Canon Optic Wireless Mater & Slave Modes
  • Large Dot Matrix LCD Display
  • 450 Full Power Flashes (With PowerPack Dual Output)
  • 0.05 – 4.5 Second Recycle Time (Halved With 2 Into 1 Battery Cord)

 

  For instructions on how to set up and use this product, Please Click Here.

  For more information about how High-Speed Sync works, Please Click Here.

 

Please see the video below for a basic run-through of the HyBRID360 TTL's Interface

A-030302 A-03030 A-0303 A-030 A-03 A-0

Christmas

Godox WISTRO WISTROAD360II-C AD360II AD360 AD -N II CANON 360 Ws

SPECIFICATIONS

Model

Hybrid360 ETTL

Guide Number

80m @ ISO 100 with standard Reflector

Speedlite Type

ETTL II Compatible

Recycle Times

0.05-4.5s (with PowerPack Dual Output)

Flash Duration

1/220 to 1/10,000 sec

Power Range

8 Stops  in 1/3 stop increments (1/1 to 1/128 power)

Colour Temperature

5600±200k

High-speed Sync

Up to 1/8000 sec

Multi-Flash Mode

Up to 100 times, 199Hz

First Curtain Sync / Second Curtain Sync

Yes

Flash Exposure Compensation

Manual. FEB: ±3 stops in 1/3 stop increments

Flash Exposure  Lock

With < FEL > button or <*> button

Power Supply

PowerPack Dual Output lithium power pack

No. Flashes Per Charge

450

Trigger Method

Hot-shoe, 3.5mm sync cable, PC sync socket, Wireless control port

Wireless Functions

Master, Slave, Off

Controllable slave groups

3 (A, B, and C)

Optical Transmission Range

Master (transmitter): approx. 3m;

Slave (receiver): Indoors: 12 to 15 m/ 39.4 to 49.2 ft.; Outdoors: 8 to 10 m/ 26.2 to 32.8ft.

Master unit reception angle:±40° ; horizontally, ±30° vertically

2.4GHz Radio Transmission Range

70m (HYBRID360 ETTL as a transmitter)

100m (PRO ST-III C / PRO ST-III N as a transmitter)

Number of Channels (Optical)

4 (1-4)

Number of Channels (2.4GHz Radio)

32 (1-32)

Modelling Flash

Fired by Camera’s Depth of Field Preview Button

Vertical Rotation

-15° to 90°

Horizontal Rotation

0° to 270°

Dimensions

75mm x 95mm x 220mm (Without Reflector & Flash Tube)

Net. Weight

800g  (Without Reflector & Flash Tube)

 

BOX CONTENT

Item

QTY

Hybrid360 ETTL Unit

1

Flash Tube

1

Mini Stand

1

Off-Camera Adapter

1

Power Cable

1

Reflector

1

PowerPack Dual Output Battery

1

Delivery Information

To see all UK and International shipping charges please click the button below.

Mainland services

We are a UK based dealer, all items are in stock and ready to dispatch. Once the order has been placed, we aim to ship out your products within 24 hours. Providing the product is in stock, items will be shipped within 24hours of receiving cleared payment. For all orders placed before 2:30pm Monday to Friday, same day collection will be arranged. We ship our lighting kits by Interlink Express and Parcelforce. All can be tracked and can take 1-2 ... Read More

Reviews for PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON)

(4)   By: ajpl@blueyonder.co.uk | 25 April, 2017

PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON)

Initial impressions when testing functionality and usability were very good. Been too busy to test further for now.

(4)   By: M Lewis | 31 January, 2017

I'm hoping it will be great

My friends have the Godox ad360 version and love them. I decided to buy the Pixapro versio, even though it was more expensive as I had heard that their customer service was very good. My 1st unit was not working correctly and it was replaced quickly. The 2nd unit came and Pixapro installed a firmware update. This unit also had glitches, so was returned to Pixapro. I am hoping ithis 3rd unit will be ok. These units are amazingly powerful for such a small unit. Just hope I receive a good one this time. Pixapro as a company have outstanding customer service too.

(5)   By: Softboxlive Photography | 10 May, 2016

Fantastic products and excellent customer services. Highly recomended.

I had purchased the Pixapro 360 ETTL Hybrid Lighting system for a fashion shoot as i had heard lots of excellent reviews about this product. I was also using the Pixapro 90" Easy up Octa Softbox and the Pixapro TTL Triggers. The equipment was so easy to use and was up and ready to go in minutes. The amount of power you get from this flash easily outweighs any speedlight and is definitely recommended for travel and location. The equipment was well packaged and arrived the next day. I can honestly say i am very pleased with all my pixapro products and will be getting more from this company in the near future.

Write a Review

Please enter your review for PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON) below

Your Rating
Select stars to define your rating:
1 2 3 4 5

Returns

EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel your order and return the goods within 30 working days for a full refund of the purchase price of the goods, please contact us at customerservice@essentialphoto.co.uk

The following returns procedure and policy should be followed:

1.     Buyer shall contact us at customerservice@essentialphoto.co.uk prior return.

2.     Buyer shall fill out the Return Form, found above. 

3.     Buyer shall email the application form to customerservice@essentialphoto.co.uk, also including a copy with the return order.

4.     ... Read More

Questions & Answers

Answer:

If you are using the ST-III trigger with the Hybrid360 TTL in 2.4GHz Wireless Slave Mode, your Hybrid360 TTL should automatically switch to HSS mode if your camera's shutter-speed is set to above its sync speed.

Answer:

  • ST-III, ECO2.4 or PRO AC 2.4GHz: - If you would like to trigger your Hybrid360 TTL with any of these triggers, keep pressing the button located just above the test button (circled in red) until you get a red screen with a Wireless Symbol (as shown in top-left image).
  • Optical TTL Slave Mode: - If you want to trigger your Hybrid360 using a TTL Flash commander (e.g. a speedlite with TTL master mode, or a camera with a flash commander mode), keep pressing the button located just above the test button (circled in red) until you get a red screen with the Optical Symbol (as shown in top-right image).
  • Using PRO AC Trigger with USB receiver: - If you are using the Older 433MHz Pro AC trigger with the USB receiver, it will trigger in any mode. However, if you would like to control the HyBrid360 TTL remotely using the Pro AC 433MHz Trigger then you need to keep pressing the button located just above the test button (circled in red) until you get a green screen with no Symbol (as shown in bottom-left image).
  • Using Other Third-Party Triggers: - If you would like to use a Third-Party trigger system with the Hybrid360 TTL using the sync ports (either PC sync or 3.5mm sync jack) it should trigger in any mode, however please be aware that you will lose the ability to remotely control the Hybrid360, and may lose other features (depending on the trigger).

To switch between Manual and TTL mode, press the button (circled in yellow).

Answer:

You probably have your Hybrid360 ETTL in the wrong mode. To use it as a slave with a canon master flash, you need to set it to ETTL slave mode. To do this, keep pressing the button just above the flash test button (circled in red on the photo below) until you see the screen turn red, and it says ETTL in the top-left corner with a lightning-bolt symbol displayed next to it (as shown in photo below).

Now the Hybrid is ready for use as a TTL slave for a canon master flash (please be aware that it will only work with canon's optical master flash mode. It is not compatible with the radio flash transmission offered by the 600EX-RT).

Answer:

To check the firmware version of your Hybrid360 TTL flashes, press and hold the (Zm / C.Fn) button

Answer:

To restore the Hybrid360 ETTL back to factory settings, press and hold both RST buttons simultaneously.

Answer:

Please contact us at customerservice@essentialphoto.co.uk, and then let us know which product you would like the firmware for, and then follow these steps.

  1. First download and install the G1 program which is required to upgrade the Firmware for All Pixapro Flashes and Triggers.
  2. Download the relevant Firmware Update file for the product you would like to upgrade the Firmware for.
  3. Open the G1 program, and click the "Select File" button and select the firmware file that corresponds to the product that you would like to upgrade.
  4. Connect the product to your computer using a micro USB cable (The same type used by most Android phones).
  5. Then click the “Connect” button in the G1 program to connect to the Pixapro Product. If connection is successful, a message will be displayed on the G1 program menu. If connection is unsuccessful, please check that the Micro USB cable is properly inserted, and/or is working.
  6. Once Connection is Successful, click the "Upgrade", and you will be prompted when the upgrade is complete. If Upgrade is unsuccessful please repeat process from step 3.
  7. Once the Firmware has been updated successfully, then click the “disconnect” button in the G1 Software, and then disconnect your product from your computer.

Answer:

It sounds like you are trying to turn the PowerPack on with nothing plugged into it. The PowerPack Dual Output battery has a safety feature which doesn’t allow you to turn the battery on unless you have a speedlite or bare bulb flash connected to it. If nothing is plugged into the PowerPack, it will only stay on for about a second to show you the amount of battery power you have left.

If you plug you flash into the PowerPack, it should turn on with no problem providing there is enough charge in your battery.

Ask a question

Please enter your question below and you receive an email once it has been answered

© 2017 Essential Photo | Registered company number 07601334

safe payments by Secure Payments    iD30 eCommerce