The CITI600 Manual Twin Remote Head Travel Kit has been designed to offer a 1200WS Battery Powered Flash lighting option on location. The PIXAPRO CITI 600 (Godox Wistro AD600BM) is a revolutionary battery-powered portable monolight that features a self-contained rechargeable Battery, the High-Speed Studio Powerful Stroboscopic Flash that uses Insulated-Gate Bipolar Transistor (IGBT) technology to achieve short flash durations, as well as fast recycle times, which allows you to capture fast motion such as dancing, jumping and even water splashes with ease. When attached to the Twin Remote Flash Head, this enables you to combine the power into a 1200Ws flash head, using the included Flash Tube. All of this can be stored in the included Tough Rolling Case, with a Padded interior for extra protection during transportation. It is perfect for people who shoot weddings, portraits, events, fashion, sports and advertising. It is especially good for shooting on location due to the flash being easily portable.
Flash Duration: between 1/220 second to 1/10,000 second for sharper images whilst maintaining colour accuracy throughout its power range
Fast Recycling times: a Super-quick Recycle Times of between 0.01– 2.5 Seconds.
Power Range: has an 9-stop power range (1/1 – 1/256 power) in 1/3rd stop power increments
Modelling Bulb and Lamps: 10W LED modelling lamp which is equivalent to approximately100W tungsten but runs much cooler for longer usage time.
The One System: can be used with any other Flash unit in the PIXAPRO range.
Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speedlights or any other TTL strobe.
Compatible Accessories: compatible with a wide range of S-Type Accessories and Modifiers.
Built in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System)
User-friendly interface: with large Dot-Matrix LCD screen, enables you to quickly and easily change your flash settings with the use of large, easy to access buttons and a control dial.
Extension Cable: The 1200Ws Remote head features an extension cable which plugs into the flash-tube sockets of 2x CITI600 flash heads.
Bowens S-Type Mount: The Remote head itself has its own led modelling light, and a Bowens S-Type accessory mount which enables you to mount a wide variety of modifiers that are available on the market with it.
Multiple Usage Options: The Main CITI600 bodies can be carried over the shoulder using the Portable Shoulder Bag for CITI600 (Sold Separately), whilst the remote-head is being hand-held by an assistant, or you can simply mount it to a regular light-stand.
For use with: Design to be used with the CITI1200 Twin Remote Head Only
Size: at 56cm height and 45.5cm wide, with a 26cm depth the roller case is suitable for most flashes.
Material: made of a hard-wearing polypropylene material which is sure to keep your equipment shock and water protected whilst in transport.
Internal: 51.5cm in height, 39cm width and 20cm depth you can store many things in this backpack and separate them with the removable dividers to tailor it to your needs.
Wheels: two heavy-duty roller wheels and a recessed telescopic extendable built-in handle, the case is easy to travel with too.
The CITI600 Manual Twin Remote Head Travel Kit is the perfect solution for a compact 1200Ws Portable flash lighting system.
For more information on the products included within this kit please see the links below:
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
|Guide Number||87m @ ISO100 with Standard Reflector|
|Flash Duration||1/220s - 1/10,000s (T0.1)|
|Recycle Times||0.01 – 2.5 Seconds Recycle Time|
|Manual Flash Power Range||1/1 - 1/256 (1/3 Stop Increments)|
|Power Source||Built in (removable) 11.1V / 8700mAh Lithium-ion Battery|
|Number of Flashes||Approx. 500 Full Powered Flashes Per Charge|
|Flash Modes||Manual / Multi|
|High speed Sync||Up to 1/8,000s|
|Radio Frequency||2.4GHz (Compatible with PIXAPRO PRO ST-III TTL Triggers)|
|Work Range||100m with ST-III Transmitter in Open Area|
|Controllable Slave Groups||5 (A, B, C, D, E)|
|Other Trigger Methods||PC Sync Port, 3.5mm Sync port, USB port for Pro AC Trigger Set|
|Dimensions||220mm x 245mm x 125mm|
|Accessory Mount||Bowens S-Type|
|Maximum Power Output When attached to the Twin Remote Head||1200Ws|
|Twin Remote Head Modelling Lamp||10W LED|
|Twin Remote Head Cable Length||2m|
Free UK Standard delivery on orders over £150.00*
|Order Date (if received before 3pm)||Cost||Latest Expected Delivery Date|
|UK Saver Delivery (Orders over £150*)||FREE||2-3 Days|
|UK Saver Delivery||£5.00||2-3 Days|
|UK Next Working Day||£8.00||Next Working Day|
|UK Before 2pm Next Working Day||£18.00||Before 2pm Next Working Day|
|UK Saturday Delivery||£30.00||Saturday|
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country..
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Our new price match policy guarantees you the same price as other retailers so you’re alway getting the best deal possible...
The comparison needs to meet the following: