PiXAPRO
PRO ST-III R 2.4GHz Flash Receiver Only (X1R)
-
2.4 GHz ONE System Compatible
-
32 Channels
-
5 Flash Groups
-
TTL Compatible
-
Supports High-Speed Sync
The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system.
5 Individual Groups
The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off.
32 Seperate Channels
The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights.
NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
- Extra Receiver for ST-III TTL Flash Trigger set
- Powered by 2x AA Batteries
- 100m Working Range (in an open area)
- 32 Channels
- 1x PRO ST-III Receiver
- 1x 3.5mm Sync Cable
- 1x 3.5-6.3mm Adapter
- 2x Shutter Release Cable (One of each Type)
Specifications
| Radio Frequency | 2.4GHz (Compatible with PIXAPRO One System) |
| Power Supply | 2x AA Batteries |
| High-Speed Sync Support | Yes |
| Working Range | 100m (In an Open Area) |
| Channels | 32 |
| Groups |
5 in GR Grouping Mode 3 in Ratio Grouping Mode |
| Dimensions | 70x65x47mm |
| Weight | 70g |
Videos
Downloads
Q&A’s
- Whilst you can use the ST-III to trigger these lights, you can’t remotely control the power of those flashes. In order to do that, you will require the PiXAPRO PRO AC Trigger set
- The ST-III triggers should work with no problems, though you would require a ST-III receiver for each of your Li-Ion TTL speedlites. You can also control the power of your Li-Ion TTL speedlites remotely.
- The ST-III Receivers are cross compatible with the Pro AC 2.4GHz triggers, and also the ECO2.4 Triggers. However, they are not compatible with the ST-II transceivers, or the older 433MHz versions of the Pro AC or the ST-I Triggers
- To use the Multi-Flash Setting with your ST-III Flash Triggers, please follow these steps:
- To Set-up multi-flash function on your ST-III trigger set, keep pressing the
button until the TTL and M icons are not displayed on the LCD (As shown in the photo below). Once that has been done, press and hold the Button to enter multi flash setting submenu. 
- Once in the Multi-Flash submenu, two lines displayed as T (for the amount of flashes) and H (for the flash frequency in Hz) should appear as shown in the photo below.
- Press the
Button to make the “T” value blink. Once blinking, you are able to set the amount of flashes according to your needs by using the wheel. - Press the
Button again to change the “H” value. - Once your Multi-Flash settings have been set, Press the
Button to exit the Multi-Flash settings screen - In the multi flash setting submenu, press the
Button to return to main menu. Multi Flash Settings (Output Value) - In the multi flash (TTL and M icon are not displayed), press the
Button to set the current group. - In multi flash mode, you will be unable to exceed 1/4 power as the flash units can’t do multi-flash with output settings higher than ¼ power.
- In the multi flash (TTL and M icon are not displayed), press the
- To Set-up multi-flash function on your ST-III trigger set, keep pressing the
- No, that doesn't work unfortunately. The master flash requires some kind of physical connection to the camera’s hot shoe in order for that to work. You can either sit the master flash directly on the camera’s hot shoe, or use an off-camera TTL flash cord.
The only way around it would be to use one of the following solutions:
- Place a speedlite, set to master mode on top the ST-III trigger’s hot shoe, whilst the ST-III trigger is on camera.
- Purchase another ST-III receiver for the other speedlite.
- Purchase an Off Camera TTL cable for the Master flash to sit on.
Got a question of your own?
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a questionDelivery & Returns
UK Delivery Rates
Free UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
Returns
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
International Delivery Rates
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
Easy to fit, easy to use, pretty much intuitive.
Easy to fit, easy to use, pretty much intuitive.
PIXAPRO® PRO ST-III R 2.4GHz Flash Receiver Only
good product - minor issue on upgrade to firmware but soon sorted
PRO ST-III R 2.4GHz Flash Receiver Only
Fits well this was nikon fit and works well.
PRO ST-III R 2.4GHz Flash Receiver Only
As always does as it says without a doubt very good brand
PRO ST-III R 2.4GHz Flash Receiver Only
I chose this product as I originally wanted a Godox V1 and this is the same product 100% just cheaper than the godox equivalent. They are exactly the same quality and all work with each others systems. I could not be happier with the one system they provide.
- 1
- 2
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.