PIXAPRO® PRO ST-III N T 2.4GHz Flash Transmitter Only (FOR NIKON) | Essential Photo | Photographic lighting and equpiment
4.91 / 5.00 of 412 essentialphoto.co.uk customer reviews | Trusted Shops

Checkout Shopping Cart
0 Item - £0.00

Specialist in studio lighting equipment and accessories for the Digital, Film and Video industries
Free Delivery on orders over £150

PIXAPRO® PRO ST-III N T 2.4GHz Flash Transmitter Only (FOR NIKON)

Product Code: M-060016   Availability: In stock
£44.99 inc. vat

Order Securely Online

100% Security Protected Payments
Next day delivery available
30 Day No Quibble Returns
UK Stock (no grey imports)
Buy online now
Add to Basket

We ship internationally too

Product Information
Description

PLEASE NOTE: This video is not full a representation of what is included in this listing as some items are used for demonstration purposes only. Please see the “Specifications” tab for information on what this listing includes.

The PIXAPRO PRO ST-III N is a 2.4GHz Radio flash trigger system capable of transmitting TTL information designed for use with Nikon cameras and iTTL Compatible flashes. The PIXAPRO PRO ST-III N trigger set has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems.

As well as the traditional Nikon A:B C ratio style interface, the PIXAPRO PRO ST-III N also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. You also have the ability to mix TTL and Manual Groups if needed, which makes the PRO ST-III system very versatile. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights.

The PIXAPRO PRO ST-III N supports TTL, HSS (High Speed Sync) and even has a HSS Pre-sync Timing Adjustment feature, which is great for those times where you need to increase your shutter-speed beyond your camera’s sync speed.

It also features a PC sync cable socket enabling it to be used to trigger studio strobes, as well as a Micro USB port to enable you to update the ST-III’s Firmware as new technologies become available.

The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PLEASE NOTE: ST-III Trigger is designed for use with the CITI600TTL and Hybrid360 ETTL or ITTL Flashes which have built-in ST-III receivers. Use with other flashes require a separate receiver.

Features

  • Large 100m Transmission Range
  • Supports up to 5 Groups and has 32 different channels
  • Supports High Speed Sync up to 1/8000th sec.
  • Can also be used as a Wireless shutter release
  • Large LCD Display
  • Powered by 2x AA batteries

 

  For instructions on how to set up and use this product, Please Click Here.

  For more information about how High-Speed Sync works, Please Click Here.

Godox X1NTTL X1N TTL X1 -N

SPECIFICATIONS

Model

PIXAPRO PRO ST-III TTL Transmitter Only (For Nikon)

TTL Flash

iTTL Auto flash

Radio Frequency

2.4GHz Transmission

Power Supply

2x AA Batteries

Manual Flash Triggering

Yes

High-Speed Sync Support

Yes

Working Range

100m (In an Open Area)

Channels

32

Groups

5 in GR Grouping Mode

3 in Ratio Grouping Mode

Dimensions

72x75x52mm

Weight

100g

 

BOX CONTENT

Item

QTY

PRO ST-III N T (Transmitter)

1

 

Delivery Information

To see all UK and International shipping charges please click the button below.

Mainland services

We are a UK based dealer, all items are in stock and ready to dispatch. Once the order has been placed, we aim to ship out your products within 24 hours. Providing the product is in stock, items will be shipped within 24hours of receiving cleared payment. For all orders placed before 2:30pm Monday to Friday, same day collection will be arranged. We ship our lighting kits by Interlink Express and Parcelforce. All can be tracked and can take 1-2 ... Read More

Reviews for PIXAPRO® PRO ST-III N T 2.4GHz Flash Transmitter Only (FOR NIKON)

Write a Review

Please enter your review for PIXAPRO® PRO ST-III N T 2.4GHz Flash Transmitter Only (FOR NIKON) below

Your Rating
Select stars to define your rating:
1 2 3 4 5

Returns

EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel your order and return the goods within 30 working days for a full refund of the purchase price of the goods, please contact us at customerservice@essentialphoto.co.uk

The following returns procedure and policy should be followed:

1.     Buyer shall contact us at customerservice@essentialphoto.co.uk prior return.

2.     Buyer shall fill out the Return Form, found above. 

3.     Buyer shall email the application form to customerservice@essentialphoto.co.uk, also including a copy with the return order.

4.     ... Read More

Questions & Answers

Answer:

Our flash triggers are not compatible with PocketWizard triggers unfortunately.

The Built-in flash trigger on the Sekonic Flash Meters, are also not compatible with our triggers, however you can still meter the flash by pressing the "TEST" button on the flash trigger. Most flash meters have a mode where it will wait a certain amount of time after the mesure button has been pressed for a flash to fire. Simply put your meter into this mode, press the "Measure" button on the meter, and then press the "Test" button on the trigger to fire the flash so you can get your exposure reading (Please refer to your flash meter's manual for more details).

Answer:

Please see image below which shows which switch configurations represent which channels on the ST-III Trigger system. Please Note: Your ST-III must be set to manual mode to work with PRO AC 2.4GHz receiver. Not compatible with older 433MHz Receivers.

Answer:

The 1/256th power setting isn’t available by default, you have to enable it in the Custom Functions menu (CFn). To enter the custom functions menu, press and hold the <CH> or <CH/OK> button (depending on which batch your trigger is from) for a few seconds and the custom functions menus should come up. Once in the Custom Functions menu, scroll to CFn. 5 and press the <GR> button, and the option will flash. Use the scroll wheel to select the 1/256 power setting, and then press the <GR> button again to set it. To go back to the main menu, press the <Menu> button.

Answer:

To restore your ST-III back to factory settings, press and hold the button whilst turning the Transmitter on.

Answer:

You have to set the Flash Exposure Compensation (FEC) from the transmitter itself, and not the flash, however the FEC will not be displayed on the speedlite itself.

Answer:

Please upgrade the firmware of your transmitter (ST-III C for Canon - V15 or later, ST-III N for Nikon - V16 or later, ST-III S for Sony - V13 or later). To activate the super close (30cm inside) trigger option, hold down the TEST button and switch on your ST-III trigger until the STATUS indicator flashes twice. After release, you can access this option from the wireless remote control 0-30 meters.

Answer:

It sounds like your camera may be set to Red-Eye Reduction mode. When in this mode, your speedlite will rapidly flash which is used to close the pupils of your subject to reduce or eliminate red-eye). Please ensure that the Red-Eye reduction is disabled in your camera settings

Answer:

The Auto-Zoom feature will only work when trigger is flash is set to auto (A) mode. The Auto zoom is disabled when use in manual (M) mode.

Answer:

There are many different reasons which could cause the ST-III triggers to misfire. Here is a list of the possible causes:

  • The transmitter battery is low: In this situation make sure there is sufficient battery power to power the ST-III transmitter. Check the display to ensure that the “Low battery” icon is not blinking.
  • The receiver battery is low: In this situation make sure there is sufficient battery power to power the ST-III receiver. Check the display to ensure that the “Low battery” icon is not blinking.
  • Since the ST-III uses a 2.4GHz frequency, other devices that use a similar frequency (such as 2.4GHz wifi routers, Bluetooth devices, etc.) can interfere with communication between the ST-III triggers, and cause misfires. If there any similar devices in the vicinity of the triggers, try switching channels, which should hopefully resolve the problem.
  • Make sure that the flash ready indicator is lit, and not in thermal protection or any other abnormal state.
  • Try updating the Firmware on the ST-III Triggers and/or Receivers.

Answer:

To check which version of the Firmware Version you have installed on your ST-III trigger: Switch the power off, then press and hold the button, and then switch the power back on whilst still holding the button.

To check which version of the Firmware Version you have installed on your ST-III Receiver: Switch the power off, then press and hold the button, and then switch the power back on whilst still holding the button.

Your Current Firmware Version should then be displayed on the screen like as shown in the photograph below.

Answer:

The Hot Shoe on the trigger allows you to use a feature known as TTL Pass-Through, which enables you to use your ST-III trigger and a TTL speedlite on camera simultaneously. Perfect for times when you still need a speedlite on camera as a fill light etc.

Answer:

No, that doesn't work unfortunately. The master flash requires some kind of physical connection to the camera’s hot shoe in order for that to work. You can either sit the master flash directly on the camera’s hot shoe, or use an off-camera TTL flash cord.

The only way around it would be to use one of the following solutions:

  • Place a speedlite, set to master mode on top the ST-III trigger’s hot shoe, whilst the ST-III trigger is on camera.
  • Purchase another ST-III receiver for the other speedlite.
  • Purchase an Off Camera TTL cable for the Master flash to sit on.

Answer:

You can if you have Firmware v15 or later installed on your trigger set (You can check by what version of the firmware you have by holding the button as you switch the ubit on).

To control the power of your Nikon flash, you need to set Nikon flash TTL mode, and then you can manually control the power from your ST-III trigger.

If you require the latest firmware update for your ST-III trigger system, please contact us at Customerservice@essentialphoto.co.uk

Answer:

To use the Multi-Flash Setting with your ST-III Flash Triggers, please follow these steps:

  1. To Set-up multi-flash function on your ST-III trigger set, keep pressing the button until the TTL and M icons are not displayed on the LCD (As shown in the photo below). Once that has been done, press and hold the Button to enter multi flash setting submenu.

  2. Once in the Multi-Flash submenu, two lines displayed as T (for the amount of flashes) and H (for the flash frequency in Hz) should appear as shown in the photo below.

  3. Press the Button to make the “T” value blink. Once blinking, you are able to set the amount of flashes according to your needs by using the wheel.
  4. Press the Button again to change the “H” value.
  5. Once your Multi-Flash settings have been set, Press the Button to exit the Multi-Flash settings screen
  6. In the multi flash setting submenu, press the Button to return to main menu. Multi Flash Settings (Output Value)
    1. In the multi flash (TTL and M icon are not displayed), press the Button to set the current group.
    2. In multi flash mode, you will be unable to exceed 1/4 power as the flash units can’t do multi-flash with output settings higher than ¼ power.

Answer:

For Nikon models: Rear-curtain sync is controlled by the camera, so no set-up is needed on the transmitter. Please refer to camera manual for details.

Answer:

The Pro ST-III triggers aren’t cross compatible with our current generation of Pro AC, Pro ST-I or Pro ST-II triggers unfortunately. The ST-III use a 2.4GHz signal, whereas the others use a 433MHz signal.

Answer:

The ST-III triggers should work with no problems, though you would require a ST-III receiver for each of your Li-Ion TTL speedlites. You can also control the power of your Li-Ion TTL speedlites remotely.

Answer:

Whilst you can use the ST-III to trigger these lights, you can’t remotely control the power of those flashes. In order to do that, you will require the PiXAPRO PRO AC Trigger set

Ask a question

Please enter your question below and you receive an email once it has been answered

© 2017 Essential Photo | Registered company number 07601334

safe payments by Secure Payments    iD30 eCommerce