(BTS) LUMI 400 with Creativus Imago and Jane Kelly Photography For Photoshoot Magazine
(BTS) LUMI 400 with Creativus Imago and Jane Kelly Photography For Photoshoot Magazine
get yourself FREE DELIVERY on orders over £150*
NEXT DAY DELIVERY only £8
We only sell UK STOCK no grey imports
PiXAPRO
LUMI400 II Beauty 3 Head Studio Flash Kit with Boom (Advanced)
A-040705
-
Guide Number 65
-
6th Power Stop Range (1/1 – 1/32)
-
0.3 – 1.0s Recycle Times
-
2.4GHz ONE System Compatible
-
Fan Cooled
The PIXAPRO® LUMI 400 II flash (Godox Gemini GS400II), is a stylish, robust, versatile and dependable studio monolight strobe suitable for both the serious amateur and the pro photographers alike. It offers an impressive flash duration of up to 1/2000th of a second, as well as super-fast recycling time at just over one second.
The PIXAPRO® LUMI 400 II features a bright 150w modelling lamp, and a 400Ws flash tube, that has a 6-stop power range (1/1 – 1/32 power) which can be adjusted in 2/10 of a stop increments. The power output is represented by 5.0 (min.) to 8.0 (max.) on the digital screen located at the back of the unit. The Lumi 400 II also features an Auto-Dump feature, meaning that you don’t have to manually discharge your flash then you reduce its output power. The power of the flash and the modelling lamp can be adjusted using two control dial located at the back of the unit.
The PIXAPRO® LUMI 400 II features a built-in 2.4GHz flash receiver, which allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely, removing the need to go up and individually adjust every light in your set up, saving you precious time. It also has a 3.5mm sync jack allowing it to be triggered by a sync cable, or other radio triggering systems. It also features an intelligent slave cell that can be set to ignore a Pre-Flash allowing it to be used in conjunction with your TTL flashes with no problems, opening up a whole new world of lighting possibilities.
The PIXAPRO heavy duty Telescopic background stand system is sturdy and reliable, and can be used with muslin backdrops or with seamless paper backdrops. This system comes with two air cushion stands which can extend up to 2.8m in height, and a thick telescopic crossbar. This telescopic cross bar is perfect solution for small studio or any locations with limited spaces, thanks to its flexible extension design, it can be extend from 1.2 to 3 meters in width. The crossbar also features convenient connections that are compatible to any standard light stand with a 5/8” spigot, if you should require more height out of your background support system.
This background support system also collapses down to fit into a relatively small and quality carrying case for easy transportation if you should need to venture outside of the studio.
To Find Out More About the PIXAPRO® Flash Ecosystem, Please Click Here.
For Spec. & Price Comparison with other popular Brands, Please Click Here.
Features
- Simple Intuitive controls
- 6 f-Stop Power Range with 30 step adjustment from 5.0 to 8.0 in increments of 0.1
- Fast Recycling times
- Flash Duration of up to 1/2000s (Dependant on flash output)
- Digital Display to show Flash Output
- Optional Wireless Remote power control and flash triggering system.
- High-quality 150W modelling lamp
- Multiple modelling control modes.
- Anti-pre-flash function, allowing the Lumi 400 II to be used with Speedlites.
- Automatic power dump feature.
- Auto memory to recover your previous settings.
- Compatible with a wide range of S-Type Accessories and Modifiers
What’s In the Box
- 3x PIXAPRO® Lumi 400 II Flash Heads
- 1x Boom Stand
- 2x Lighting Stands
- 2x 60x90 Softboxes
- 1x Translucent White Umbrella
- 1x 7” Standard Reflectors
- 3x 150W Modelling Bulbs
- 1x Pro AC Wireless Trigger
- 3x Power Cables
- 1x Rolling Case
- 2x Light Stand
- 1x Telescopic Cross Bar and Heavy Duty Carry Bag
- 1/1/1x Green, Black & White Cotton Muslin
Specifications
| Max Power (WS) | 400Ws |
| Guide Number | 65 (m ISO 100) |
| Colour Temperature | 5600 ± 200K |
| Operating Voltage | AC200-240V/50Hz |
| Power Output Control | OFF, 5.0~8.0 （1/32~1/1） |
| Modelling Lamp (W) | 150W |
| Recycle Time | 0.3~1.5s |
| Triggering Method | Sync cord, Test button, Slave triggering, Wireless control port, Built-in 2.4GHz receiver. |
| Receiver Frequency | 2.4GHz |
| Flash Duration | 1/2000~1/800s |
| Fuse | 8A |
| Dimensions | Flash diameter Φ12.5CM, height of flash with handle 25CM, length of flash with lamp cover 35CM |
| Net Weight | Approx. 2.0kg |
Videos
Q&A’s
I have a 400Ws flash and, I would like to know if I can use a 200Ws flash tube with it as I would like to go below the minimum power of my current flash?
- The flash power is stored in capacitors inside the flash head and are not produced by the flash tube itself, so using a using a flash tube with a lower wattage capacity could result in blowing the flash tube blowing and cause damage to your flash head.
If you would like to reduce the power of your flash even further, there are a few things that you can do:
- You could move your lights further back from your subject (doubling the distance of your light will reduce your light’s exposure by approximately two stops).
- You can add extra diffusion to your modifier (e.g. diffusion material from a softbox, or the diffuser inside a 5in1 reflector etc.).
- You can use Neutral-Density (or ND) gel filter on your modifier which you can purchase from most theatre supply stockists. (Please note: do not place ND Gel too close to the modelling bulb as it could prove to be a fire hazzard).
- You could use an ND filter on your camera’s lens to reduce the amount of light entering your lens.
Any of the above techniques, by themselves or in combination will enable you to further reduce the light output from your lights.
How do I replace the Fuses in the LUMI400?
- To access the fuses in the LUMI400, you will need to remove the panel which is placed just above the plug socket. To do this, there is a little tab just on the inside of the plug socket which you will need to pop open with a screwdriver to make the fuses visible. There should be two fuses inside the light, the main fuse is at the front and the spare fuse is towards the back. You can simply switch these fuses and this should resolve your issue.
How do I change the Power display mode on my LUMI400?
- In order to change this, you will need to hold down the Set Button on your trigger for approximately 2 seconds, this should then change the setting to your desired choice.
Got a question of your own?
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a questionDelivery & Returns
UK Delivery Rates
Free UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
Returns
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 30 working days for a full refund of the purchase price of the goods.
International Delivery Rates
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
Product Reviews
Lights, Camera, Awesome!
Value for money here is paramount! - these strobes are awesome - Great power range, modelling lamp and solid reliable build. So good in fact i bought a second one. My goto gear people. Keep it up Pixapro!
(Taken from our Amazon store to see this review please go to the following link:
https://www.amazon.co.uk/PIXAPRO%C2%AE-Monolight-fanCooled-FastDelivery-2YearWarranty/dp/B00HU3HHY2/ref=sr_1_5?s=electronics&srs=8455360031&ie=UTF8&qid=1468594905&sr=1-5)
Amazon Review
Having been a studio based owner photographer now retired I just do Passport and ID photos from home based studio. My last Elinchrom died I need a replacement Asap, I picked the Pixapro 400 arrived in 2-3 days after a couple of quick tests I am really pleased with the results of the finished prints and the quality and power of the Flash Head, easy to use quick to change settings with good visual display consistent outputs. It seems well made and comes with everything you need for an instant start.
Great
Great product for a reasonable price
Perfect!
Perfect Kit to start a professional Studio. It is quality and reliable. I would recommend.
five stars
Great product. Very happy with the quality.HIGHLY RECOMMENDED!
- 1
- 2
Related Products
Related Articles
View all blog articles
LUMI400 vs Interfit Honey Badger
In this blog, we compare two lights in the market, the PIXAPRO LUMI400 and the Interfit Honey Badger, to see which light would be best for you.
LUMI400 vs Elinchrom D-Lite RX 4
When it comes to studio lighting, many people are looking for a high-quality light that is also affordable for the everyday budget. In this Blog, we take a look at two lights that fit these criteria, the PIXAPRO LUMI400 and the Elinchrom D-Lite RX 4, and see which of these lights would be better for you.
Login to EssentialPhoto
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.