(BTS) LUMI 400 with Creativus Imago and Jane Kelly Photography For Photoshoot Magazine
(BTS) LUMI 400 with Creativus Imago and Jane Kelly Photography For Photoshoot Magazine
get yourself FREE DELIVERY on orders over £150*
We only sell UK STOCK no grey imports
PiXAPRO
LUMI400 II 1200Ws Three Head Kit with Trigger (400/400/400)
A-020703
-
Guide Number 65
-
6th Power Stop Range (1/1 – 1/32)
-
0.3 – 1.0s Recycle Times
-
2.4GHz ONE System Compatible
-
Fan Cooled
The Lumi 400 II Three Head kit with Trigger has been created to be adaptable and suitable to a wide variety of photography industries entry-level home studio use and suitable for both the serious or amateur photographer. It can also be a great starter when moving from Speedlite to studio flash, as the Lumi 400 II Flash unit offers around 6 times more power output than a flashgun. This kit consists of 3x LUMI 400 II Flash Head Units, so will give you an extra 400Ws compared to our twin kit version and still has every feature you will need from a studio flash such as a built-in receiver, slave mode, fast recycling time and flash duration. It’s also part of THE ONE SYSTEM, which you can mix and match with any other flash in the PIXAPRO range. Also included are 3 x lightweight and durable 240cm Air-cushioned Stand, 2x 60x90cm Rectangular Softbox to diffuse and soften the light, a 40” Translucent White Umbrella which will provide an even, soft wide light spread, 3x150W Modelling Bulbs, 1x 7" Reflector and a Pro AC Wireless Trigger to control your flashes remotely without the need of having to manually adjust settings on the flash units, all provided in a practical, portable Rolling Case for easy storage or taking out on to a location. This kit has been created to be adaptable and suitable to a wide variety of photography industries including portrait, fashion, beauty, product, commercial and many other types of flash lighting setups.
LUMI II 400 Flash
Flash Duration: boasts a flash duration of up to 1/2000th of a second giving Short flash durations for sharper images and stopping motion.
Fast Recycling time: just over one second allows you to take more frequent shots also featured is a programmable ready beep sound when the flash is ready to make the next flash.
Power Range: 6 f-Stop Power Range - 1/1-1/32 power in 1/3 or 1/10 Stop Increments (With Supported Flash Triggers)
Modelling Bulb and Lamps: comes supplied with a bright, High-quality 150w modelling lamp, and a 400Ws flash tube, that has a 6-stop power range (1/1 – 1/32 power) which can be adjusted in 1/10 of a stop increments.
The One System: can be used with any other Flash unit in the PIXAPRO range.
Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speed lights or any other TTL strobe.
Compatible Accessories: compatible with a wide range of S-Type Accessories and Modifiers.
Built-in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System)
3.5mm sync jack: allowing it to be triggered by a sync cable, or other radio triggering systems.
60x90cm Softbox
Shape: the rectangular shape helps to emulate a natural window light giving a more uniform effect, great especially for portraits and commercial photography and also useful when used as a fill light.
Highly reflective interior: helps to bounce the light around for maximum light efficiency, also the black exterior material in line to reduce the light spill.
Two-layer Diffusion: helps to create a more even coverage of light giving you more control and helping to further reduce harsh shadows.
Interchangeable fitting: a unique design that allows it to be used with a wide variety of different flashes meaning you can use this on almost any flash on the market. (Comes supplied with an S-Type ring).
40” Translucent Umbrella
Translucent-white Nylon: high-quality Nylon has been used for Durability and the white colour Produces soft, wide-spread light, ideal for lighting large areas.
Lightweight Eight-Spoked Metal Frame: comes with an 8mm shaft for allowing it to collapse to a compact form for easy transportation and for a quick and easy set-up.
Universal: can be mounted to any studio lighting fixture that can take an umbrella.
Stands
3 Tier Extension: making it collapsible to a height of 75cm and fully extend to 240cm.
Air Cushioned Dampening System: this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.
Thick Sturdy Central column: can be lowered down to be used as a fourth leg, offering extra stability.
Detachable Spigot: comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.
PRO AC Trigger
16 channels: ensuring you will not interfere or have interference from other devices, while also allowing you to control in groups or individually.
Up to 50M working Distance: as it uses radio waves it does not require a direct line of sight with your flashes for them to work, allowing you to work at greater distances (up to 50m) from your flash, giving you more flexibility.
Roller Case
Padded Interior: providing maximum protection for your equipment, and can be divided into up to six compartments.
Strong Carry Straps: fixated around the bag to ensure that you can move the roller case around when using heavier equipment.
Large Castor Wheels: comes with two-wheel so it can be used to wheel the case around making it easy for use on location or just travelling across town to shoot an event.
The LUMI400 II Three head kit includes everything that you need to start shooting in your studio. The 3x 400Ws flashes are sure to give sufficient power for almost any situation and can easily be controlled via the wireless trigger, offering fast and easy setup and use. The three air-cushioned stands will provide a stable platform to mount your lights and including the 2 x 60x90 softboxes to emulate natural window light and the umbrella to offer a wide spread diffused light, it includes everything you need. The kit can be packed away in the included roller case to make transporting the kit just as easy or even putting it away in storage. It is the best introduction to studio flash and is ideal for portrait, fashion, beauty, product, commercial and many other different types of flash lighting setups.
For more information on the products included within this kit please see the links below:
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
Features
- Simple Intuitive controls
- 6 f-Stop Power Range with 30 step adjustment from 5.0 to 8.0 in increments of 0.1
- Fast Recycling times
- Flash Duration of up to 1/2000s (Dependant on flash output)
- Digital Display to show Flash Output
- Optional Wireless Remote power control and flash triggering system.
- High-quality 150W modelling lamp
- Multiple modelling control modes.
- Anti-pre-flash function, allowing the Lumi 400 II to be used with Speedlites.
- Auto memory to recover your previous settings.
- Compatible with a wide range of S-Type Accessories and Modifiers
What’s In the Box
- 3x PIXAPRO® LUMI 400 II Flash Heads
- 3x Lighting Stands
- 2x 60x90 Softboxes
- 1x 40" White Translucent Umbrella
- 1x 7” Standard Reflectors
- 3x 150W Modelling Bulbs
- 1x Pro AC Wireless Trigger
- 3x Power Cables
- 1x Rolling Case
Specifications
| Max Power (WS) | 400Ws |
| Guide Number | 65 (m ISO 100) |
| Colour Temperature | 5600 ± 200K |
| Operating Voltage | AC200-240V/50Hz |
| Power Output Control | OFF, 5.0~8.0 （1/32~1/1） |
| Modelling Lamp (W) | 150W |
| Recycle Time | 0.3~1.5s |
| Triggering Method | Sync cord, Test button, Slave triggering, Wireless control port |
| Receiver Frequency | 2.4GHz |
| Flash Duration | 1/2000~1/800s |
| Fuse | 8A |
| Dimensions | Flash diameter Φ12.5CM, height of flash with handle 25CM, length of flash with lamp cover 35CM |
| Net Weight | Approx. 2.0kg |
| Accessory Mount | Bowens S-Type |
Videos
Q&A’s
Can I use my Camera's Flash Commander mode or my TTL speedlite in master mode, to trigger the Lumi Flashes?
- The Lumi heads all feature an intelligent slave mode (slave mode 2) which allows them to be triggered with a TTL speedlite or your Camera's pop-up flash. However your camera’s pop-up flash or speedlite can only be used to optically trigger the Lumi flashes.
What is Advantages do your Pro AC Flash Triggers have over other Flash triggers on the market such as PocketWizards?
- With our Pro AC Triggers, you have the ability to remotely control the Power Output of all of our flashes individually, or simultaneously in up to 16 different groups. This saves you from having to go up to each and every light individually to change the power of each light. It is also great for lights that are on a boom, removing the need to climb a ladder or to lower your boom to change the settings. You can also switch modelling lamps on and off with our triggers.
NOTE: Only compatible with PIXAPRO Studio Strobes and Portable Flashes.
My photos look great when reviewing on them camera screen but seem a lot darker/brighter when viewed on a computer. How do I set my camera up to show a preview of the image on my computer screen immediately after I take a picture?
- While the screen at the back of your camera will give you a fair idea of how your photograph is going to look, it doesn’t give you an accurate representation of your exposure as the screen on the back of your camera isn’t calibrated. If need to see a more accurate representation of your photograph as you shoot, it is possible to connect most DSLR cameras to your computer which will give you a more accurate representation of your exposure (tethering to a computer with a calibrated screen is recommended).
In order to do this, you will need software that supports “Tethered Capture” (such as Adobe Lightroom or Apple Aperture etc.) and also some way of connecting your camera to your computer (usually via a USB cable).
Please NOTE: Not all cameras support Tethered Capture, and not all software that supports tethered capture supports all cameras. Check with the manufacturers beforehand.
I regularly use multiple light set ups (1x Main Light, 2x Side lights and 1x Hair Light etc.), and I would like to know if you were to set each of these lights up in different groups, would they all fire at the same time?
<p>If so, how do you make it so that you only fire one or two groups at a time?</p>
- So long as all of your lights are set to the same channel, they should all fire regardless of what group they are set to. The groups are basically just for controlling the individual lights. If you need to have it so that only certain flashes fire, all you need to do is set the lights that you don’t need to the “OFF” setting from the trigger (represented by “OF” on the LCD display on the trigger, and on the Digital Display on the flash head).
For Example, if you set your key light to group 1, your side lights are set to group 2 and your hair light is set to group 3, then you decide that you don’t want your hair light to fire on this shot, all you need to do is simply turn the dial on your trigger to group three, and set that light to off (which is shown on the digital display on your trigger and light as “OF”), and then it won’t fire… Similarly if you didn’t want your key light to fire, then you’d just turn the dial to group 1 and set the key light to off, then your key light won’t fire anymore and so on and so forth.
How does this flash compare to popular brands like Bowens, Elinchrom, Interfit?.
- To see a Specification & Price Comparison with other popular brands, please go to the following link HERE
Got a question of your own?
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a question- 1
- 2
Delivery & Returns
UK Delivery Rates
Free UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
Returns
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
International Delivery Rates
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
Product Reviews
Lights, Camera, Awesome!
Value for money here is paramount! - these strobes are awesome - Great power range, modelling lamp and solid reliable build. So good in fact i bought a second one. My goto gear people. Keep it up Pixapro!
(Taken from our Amazon store to see this review please go to the following link:
https://www.amazon.co.uk/PIXAPRO%C2%AE-Monolight-fanCooled-FastDelivery-2YearWarranty/dp/B00HU3HHY2/ref=sr_1_5?s=electronics&srs=8455360031&ie=UTF8&qid=1468594905&sr=1-5)
Amazon Review
Having been a studio based owner photographer now retired I just do Passport and ID photos from home based studio. My last Elinchrom died I need a replacement Asap, I picked the Pixapro 400 arrived in 2-3 days after a couple of quick tests I am really pleased with the results of the finished prints and the quality and power of the Flash Head, easy to use quick to change settings with good visual display consistent outputs. It seems well made and comes with everything you need for an instant start.
Five Stars
Great product. Very happy with the quality.HIGHLY RECOMMENDED!
PIXAPRO® LUMI400 1200Ws Three Head Kit with Trigger and Receiver (400/400/400)
Perfect Kit to start a professional Studio. It is quality and reliable. I would recommend
Brilliant product - just as it should be.
I already have two 200Ws Pixapro Lumi studio Flash heads which I am very happy with, but decided to get the more powerful 400Ws version as my main light so that there is plenty of power when using soft boxes with diffusers and other light modifiers. I decided to use this same UK based seller again because of their fast delivery service, UK backup and warranty and so I could be certain that it would be designed for UK voltage and fitted with UK 3 pin plug and power cable.
This light has all the features that I consider to be important: Flash brightness as claimed and verified using my light meter, wireless USB port for optional wireless control , 6 stop range, internal cooling fan, auto power dump, reflector supplied, glass dome lamp protector supplied, auto memory, LED power display.
I already have a wireless transmitter and spare receiver for use with this light and everything works as it should do. I like being able to switch off modelling lights remotely rather than using the manual switch on the back of the head to avoid shaking a hot modelling bulb and reducing its life span.
So everything is up and go for my next shoot in two days time
Related Products
Related Articles
View all blog articles
LUMI400 II vs STORM400 II
We here at PIXAPRO offer a varied selection of lighting for your needs. Two of our flash lighting units that we have available are the LUMI400 and the STORM 400. In this blog, we will look at the specifications of both of these lights and advise you on which would be best for your requirements.
LUMI400 vs Interfit Honey Badger
In this blog, we compare two lights in the market, the PIXAPRO LUMI400 and the Interfit Honey Badger, to see which light would be best for you.
LUMI400 vs Elinchrom D-Lite RX 4
When it comes to studio lighting, many people are looking for a high-quality light that is also affordable for the everyday budget. In this Blog, we take a look at two lights that fit these criteria, the PIXAPRO LUMI400 and the Elinchrom D-Lite RX 4, and see which of these lights would be better for you.
Medical Photography
Medical Photography, whilst maybe not a common field, is still a field that not only occurs frequently but also can be vital in some situations.
Login to EssentialPhoto
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.