get yourself FREE DELIVERY on orders over £150*

We only sell UK STOCK no grey imports

PiXAPRO

LUMI 200 II 600Ws Three Head Kit with Trigger (200/200/200)

A-020603

Overview
Specifications
Videos
Downloads
Q&A’s
Delivery & Returns

- Overview

Guide Number 49
6th Power Stop Range (1/1 – 1/32)
0.3 – 1s Recycle Times
2.4GHz ONE System Compatible
Fan Cooled

The Lumi 200 II three head kit with Trigger has been created to be adaptable and suitable to a wide variety of photography industries entry-level home studio use and suitable for both the serious or amateur photographer. It can also be a great starter when moving from speedlite to studio flash, as the Lumi 200 II Flash unit offers around 3 times more power output than a flashgun. This kit consists of 3x LUMI 200 II Flash Head Units, so will give you an extra 200Ws compared to our twin kit version and still has every feature you will need from a studio flash such as a built-in receiver, slave mode, fast recycling time and flash duration. It’s also part of THE ONE SYSTEM, which you can mix and match with any other flash in the PIXAPRO range. Also included are 3 x light weight and durable 240cm Air cushioned Stand, 2x 60x90cm Rectangular Softbox to diffuse and soften the light, a 40” Translucent White Umbrella which will provide an even soft wide light spread, 3x150W Modelling Bulbs, 1x 7" Reflector and a Pro AC Wireless Trigger to control your flashes remotely without the need of having to manually adjust settings on the flash units, all provided in a practical, portable Rolling Case for easy storage or taking out on to a location. This kit has been created to be adaptable and suitable to a wide variety of photography industries including portrait, fashion, beauty, product, commercial and many other types of flash lighting setups.

LUMI II 200 flash:

Flash Duration: Boasts a flash duration of up to 1/2000^th of a second giving Short flash durations for sharper images and stopping motion.

Fast Recycling time: Just over one second allows you to take more frequent shots also featured is a programmable ready beep sound when the flash is ready to make the next flash.

Power Range: 6 f-Stop Power Range - 1/1-1/32 power in 1/3 or 1/10 Stop Increments (With Supported Flash Triggers)

Modeling Bulb and Lamps: comes supplied with a bright, High quality 150w modelling lamp, and a 200Ws flash tube, that has a 6-stop power range (1/1 – 1/32 power) which can be adjusted in 1/10 of a stop increments.

The One System: can be used with any other Flash unit in the PIXAPRO range.

Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speedlights or any other TTL strobe.

Compatible Accessories: Compatible with a wide range of S-Type Accessories and Modifiers.

Built in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System)

3.5mm sync jack: allowing it to be triggered by a sync cable, or other radio triggering systems.

60x90cm Softbox:

Shape: The rectangular shape helps to emulate a natural window light giving a more uniform effect, great especially for portraits and commercial photography and also useful when used as a fill light.

Highly reflective interior: Helps to bounce the light around for maximum light efficiency, also the black exterior material in line to reduce the light spill.

Two layer Diffusion: helps to create a more even coverage of light giving you more control and helping to further reduce harsh shadows.

Interchangeable fitting: a unique design which allows it to be used with a wide variety of different flashes meaning you can use this on almost any flash on the market. (Comes supplied with an S-Type ring).

40” Translucent Umbrella:

Translucent-white Nylon: Hight quality Nylon has been used for Durability and the white colour Produces soft, wide-spread light, ideal for lighting large areas.

Lightweight Eight-Spoked Metal Frame: comes with an 8mm shaft for allowing it to collapse to a compact form for easy transportation and for a quick and easy set up.

Universal: Can be mounted to any studio lighting fixture that can take an umbrella.

240cm Air Cushioned Stands:

3 Tire Extension: making it collapsible to a height of 75cm and fully extend to 240cm.

Air Cushioned Dampening System: this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.

Thick Sturdy Central column: can be lowered down to be used as a fourth leg, offering extra stability.

Detachable Spigot: Comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.

PRO AC Trigger::

16 channels: ensuring you will have no interference or interfere with others Devices, while also allowing you to control in groups or individually.

Up to 50M working Distance: As it uses radio waves it does not require a direct line of sight with your flashes for them to work, allowing you to work at greater distances (up to 50m) from your flash, giving you more flexibility.

Roller Case:

Padded Interior: Providing maximum protection for your equipment, and can be divided into up to six compartments.

Strong Carry Straps: fixated around the bag to ensure that you can move the roller case around when using heavier equipment.

Large Castor Wheels: comes with two wheel so it can be used to wheel the case around making it easy for using on location or just travelling across town to shoot an event.

The LUMI200 II Three head kit includes everything that you need to start shooting in your studio. The 3x 200Ws flashes are sure to give sufficient power for almost any situation and can easily be controlled via the wireless trigger, offering fast and easy setup and use. The three air cushioned stands will provide a stable platform to mount your lights and including the 2 x 60x90 softboxes to emulate natural window light and the umbrella to offer a wide spread diffused light, it includes everything you need. The kit can be packed away in the included roller case to make transporting the kit just as easy or even putting it away in storage. It is the best introduction to studio flash and is ideal for portrait, fashion, beauty, product, commercial and many other different types of flash lighting setups.

For more information on the products included within this kit please see the links below:

For PiXAPRO Studio Strobe Comparison, Please Click Here.

This product is provided with a UK 3-Pin Power cable, if you require an EU power cable please notify us when purchasing your item.

Features

Simple Intuitive controls
6 f-Stop Power Range with 30 step adjustment from 5.0 to 8.0 in increments of 0.1
Fast Recycling times
Flash Duration of up to 1/2000s (Dependant on flash output)
Digital Display to show Flash Output
Optional Wireless Remote power control and flash triggering system.
High-quality 150W modelling lamp
Multiple modelling control modes.
Anti-pre-flash function, allowing the Lumi 200 II to be used with Speedlites.
Auto memory to recover your previous settings.
Compatible with a wide range of S-Type Accessories and Modifiers

What’s In the Box

3x PIXAPRO® Lumi 200 II Flash Heads
3x Lighting Stands
2x 60x90cm Softbox
1x 40” Translucent White Umbrella
1x 7” Standard Reflectors
3x 150W Modelling Bulbs
1x Pro AC Wireless Trigger
3x Power Cables
1x Rolling Case

- Specifications

Specifications

Max Power (WS)	200Ws
Guide Number	49(m ISO 100)
Colour Temperature	5600 ± 200K
Operating Voltage	AC220-240V/50Hz
Power Output Control	OFF, 5.0~8.0 （1/32~1/1）
Modelling Lamp (W)	150W
Recycle Time	0.3~1.2s

Triggering Method	Sync cord, Test button, Slave triggering, Wireless control port
Receiver Frequency	2.4GHz
Flash Duration	1/2000~1/800s
Fuse	8A
Dimensions	Flash diameter Φ12.5CM, height of flash with handle 25CM, length of flash with lamp cover 35CM
Net Weight	Approx. 1.8kg
Accessory Mount	Bowens S-Type

- Videos

Videos

- Downloads

Downloads

Lumi II 200 & Lumi II 400 Instruction Manual Download Now

Studio Flash Comparison Table Download Now

- Q&A

Q&A’s

Can I use my Camera's Flash Commander mode or my TTL speedlite in master mode, to trigger the Lumi Flashes?

The Lumi heads all feature an intelligent slave mode (slave mode 2) which allows them to be triggered with a TTL speedlite or your Camera's pop-up flash. However your camera’s pop-up flash or speedlite can only be used to optically trigger the Lumi flashes.

What is Advantages do your Pro AC Flash Triggers have over other Flash triggers on the market such as PocketWizards?

With our Pro AC Triggers, you have the ability to remotely control the Power Output of all of our flashes individually, or simultaneously in up to 16 different groups. This saves you from having to go up to each and every light individually to change the power of each light. It is also great for lights that are on a boom, removing the need to climb a ladder or to lower your boom to change the settings. You can also switch modelling lamps on and off with our triggers.
NOTE: Only compatible with PIXAPRO Studio Strobes and Portable Flashes.

My photos look great when reviewing on them camera screen but seem a lot darker/brighter when viewed on a computer. How do I set my camera up to show a preview of the image on my computer screen immediately after I take a picture?

While the screen at the back of your camera will give you a fair idea of how your photograph is going to look, it doesn’t give you an accurate representation of your exposure as the screen on the back of your camera isn’t calibrated. If need to see a more accurate representation of your photograph as you shoot, it is possible to connect most DSLR cameras to your computer which will give you a more accurate representation of your exposure (tethering to a computer with a calibrated screen is recommended).
In order to do this, you will need software that supports “Tethered Capture” (such as Adobe Lightroom or Apple Aperture etc.) and also some way of connecting your camera to your computer (usually via a USB cable).

Please NOTE: Not all cameras support Tethered Capture, and not all software that supports tethered capture supports all cameras. Check with the manufacturers beforehand.

I regularly use multiple light set ups (1x Main Light, 2x Side lights and 1x Hair Light etc.), and I would like to know if you were to set each of these lights up in different groups, would they all fire at the same time? <p>If so, how do you make it so that you only fire one or two groups at a time?</p>

So long as all of your lights are set to the same channel, they should all fire regardless of what group they are set to. The groups are basically just for controlling the individual lights. If you need to have it so that only certain flashes fire, all you need to do is set the lights that you don’t need to the “OFF” setting from the trigger (represented by “OF” on the LCD display on the trigger, and on the Digital Display on the flash head).
For Example, if you set your key light to group 1, your side lights are set to group 2 and your hair light is set to group 3, then you decide that you don’t want your hair light to fire on this shot, all you need to do is simply turn the dial on your trigger to group three, and set that light to off (which is shown on the digital display on your trigger and light as “OF”), and then it won’t fire… Similarly if you didn’t want your key light to fire, then you’d just turn the dial to group 1 and set the key light to off, then your key light won’t fire anymore and so on and so forth.

How does this flash compare to popular brands like Bowens, Elinchrom, Interfit?.

To see a Specification & Price Comparison with other popular brands, please go to the following link HERE

Got a question of your own?

Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.

Ask a question

- Delivery & Returns

Delivery & Returns

UK Delivery Rates

Free UK Standard delivery on orders over £150.00*

Order Date (if received before 3pm)	Cost	Latest Expected Delivery Date
UK Saver Delivery (Orders over £150*)	FREE	2-3 Days
UK Saver Delivery	£5.00	2-3 Days
UK Next Working Day	£8.00	Next Working Day
UK Before 2pm Next Working Day	£18.00	Before 2pm Next Working Day
UK Saturday Delivery	£30.00	Saturday

View a full breakdown

Returns

EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.

Read our full Returns Policy

International Delivery Rates

We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...

Check your country

Pixapro products are used by

Product Reviews

5 out of 5

5 stars

(7)

4 stars

(0)

3 stars

(0)

2 stars

(0)

1 stars

(0)

Write a review

Peter W | 16 November, 2016

Excellemt Quality Light

I have only recently started to equip my home studio. I already have some much cheaper Chinese strobe flash lights (about £40 to £50 each) which, although they work satisfactorily, are nowhere near the build quality and versatility of this Pixapro Lumi light. It is strongly built in metal rather than plastic so that I am happy to hang a soft box onto it, which with cheaper plastic lights would not be a good idea. It has a strong and well made clamp to adjust the angle of the light, which doesn't slip when a soft box is added. It is heavier than a plastic light but is nicely balanced with no toppling risk until light modifiers are fitted, but this is not a problem with a decent quality stand ballasted with sand bag or weights and well spread legs.

It has an internal cooling fan and independently controllable model, strobe light and beep function. It can work as a master or slave light. If you have a radio transmitter with built in control functions fitted to your camera hot shoe then light brightness settings (model and strobe} are adjustable from the camera. There is a USB socket to plug an all singing/dancing wireless receiver into for full remote control, as well as the usual 3.5mm sync socket for sync cable or simple basic triggering receiver. A nice touch is the provision of a hole in the reflector to enable an umbrella to be fitted with the reflector attached.

I didn't mind paying more to get so much more quality and versatility. It's too early to be able to comment on how well it will last with regular and hard use but am optimistic in view of its build quality. The instruction manual is well written too, without the usual poor English often found with so many other products.

(Taken from our Amazon store to see this review please go to the following link: https://www.amazon.co.uk/PIXAPRO%C2%AE-Monolight-fanCooled-FastDelivery-2YearWarranty/dp/B00HU1CXRK/ref=sr_1_18?s=electronics&srs=8455360031&ie=UTF8&qid=1468832728&sr=1-18#customerReviews )

Simon Johns | 12 July, 2017

Lights, Camera, Awesome!,

Value for money here is paramount! - these strobes are awesome - Great power range, modelling lamp and solid reliable build. So good in fact i bought a second one. My goto gear people. Keep it up Pixapro!

VivaLaDeva | 12 July, 2017

Very impressive kit!

I bought this kit at the photography show after being able to try it out. I am seriously impressed with the quality of everything. The carrying case has wheels and is a bonus. Everything fits in the case including the stands and softboxes. Light heads have metal casing.Took everything out of the case, put together, plugged in triggers and transmitter and it worked perfectly first time. Very little delay between shots. I hardly noticed any to be honest. Not the lightest weight kit and I wouldn't recommend it if you aim to use public transport. .. but if it's in the car and off it's perfect. The softboxes are great quality and quite large at 60 x 90 cm. Not the easiest things to put up but it gets easier once you've done it a couple of times. I may get easy assemble softboxes in the future if I travel with it much. This kit has a 2 year warranty as well. Personally I'm delighted.