The PIXAPRO® Li-ion580 ETTL and ITTL Speedlite are Powerful TTL compatible speedlites and are the first to use a rechargeable 2000mAh Lithium Ion (Li-Ion) rechargeable battery. Since it is powered by a Li-ion battery as opposed to AA batteries, it has ultra-fast recycling times of just 1.5 seconds at full power with virtually no slowdown as the power as the battery power diminishes.  The battery can power up to approximately 650 full-power flashes per charge, removing the need for bulky external battery packs, or a bags of AA batteries.

The PIXAPRO® PIXAPRO® Li-ion580 ETTL and ITTL also has other features High-Speed Sync (up to 1/8000 sec), Second-Curtain Sync, Flash-Exposure Compensation, and Flash Exposure Bracketing (up to +/-3 stops). They also include a multi-flash mode, which can be set to between 2 and 100 flashes at between 1 and 199Hz (flashes per second), which allows you to create different effects such as stroboscopic photography.

This kit comes with the PIXAPRO Pro ST-III TTL trigger set, to enable you to wirelessly trigger and control your speedlite off camera with TTL capabilities. Since the ST-III system used a 2.4GHz radio signal to communicate, your flash and camera doesn’t need direct line of site, and is not affected by strong sunlight.

This kit is also bundled with the MagMod 2 Basic kit, which will open up a wide range of possibilities with your Li-Ion580 ETTL or ITTL speedlite. The MagMod Modifier System uses Magnets to mount your modifiers to your speedlite instead of Velcro straps etc. which makes everything easier and less messy. All of the modifiers in the MagMod system are made from silicone rubber which can be crushed down to fit into your camera bag, and will always return to their original shape once taken out again.

This is the Li-Ion580 ETTL/ITTL in combination with the MagMod complete kit, is a great addition to both amateur and professional photographers arsenal.

PLEASE NOTE: The PIXAPRO® Li-ion580 ETTL and Li-ion580 ITTL are not cross compatible with each other’s TTL systems. The Li-Ion580 ETTL Model will only work with Canon EOS cameras and ETTL II compatible speedlites, and the Li-Ion580 ITTL Model will only work with Nikon cameras, and i-TTL compatible speedlites