PiXAPRO
CRI 95
Daylight Balanced
Quiet Cooling Fan
TLCI 93
Built-In Wireless Remote Receiver
The LED100D MKII Three Head Kit with Roller Case consists of 3x 100W 5600K Daylight-balanced S-Type mains-powered COB LED studio lights which use the latest High-Intensity Integrated LED technology and a CRI rating of 95 for accurate colour reproduction, and a TLCI (Television Lighting Consistency Index) rating of 95 for impeccable colour consistency. We have teamed them with 2x durable and air cushioned 240cm Stands, 1x adaptable 2in1 Boom Stand which can convert to be used as either another stand or as a Boom allowing these lights to create the versatile three point lighting setup (one main, one fill and the boom to create a hair light or Backlight). Also included 2x Barndoor kits to give you extra control and creativity with your lighting- and thanks to the S-Type Bowens mount on the light you have the option of using a variety of different modifiers such as Softboxes, Beauty Dish, Reflectors etc (sold Separately) for even further lighting control possibilities and comes supplied in a strong and sturdy Roller Case- making these lights ideal for either Videos, Stills including Portraits and Products etc, Professional broadcasting, as well as for Cinematography and Smaller Productions.
Brightness: 100W approximately 10,800 Lux at 1m with a COB chip.
Colour Temperature: 5600K Daylight Balanced
Flicker-Free: can shoot at virtually any framerate, or any shutter-angle without fear of introducing flicker.
Dimmer Dial: User friendly Digital display and dial enables you to control the brightness of the unit between 100-10% brightness.
Bowens S-Type Bayonet mount: enables it to be used with a wide range of lighting modifiers, including Softboxes, reflectors, snoots and Beauty Dishes etc.
Built- in 2.4GHz Receiver: enables you to control the brightness of up to 99 individual units with up to 10 different channels with the optional remote control (sold separately).
Built in Cooling Fan and Heat Sink: allows for Heat dispersion and prevents the unit from overheating.
Mounting: can be mounted to any 5/8” support devices including stands, booms and Hi-Glide fittings.
Energy Efficient: Low Heat emissions last up to ten times longer than CFL lights, using 1/3 to 1/30 of the energy consumed by fluorescent or incandescent lights. Fluorescent would give around 5,000-10,000hrs but LED normally gives around 50,000hrs. Running cooler as they convert around 90 percent of the energy consumed into light as opposed to tungsten lights where most of the energy is converted into heat making the shooting environment a lot more comfortable for your subject.
3 Tier Extension: making it collapsible to a height of 75cm and fully extend to 240cm.
Air Cushioned Dampening System: this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.
Detachable Spigot: comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.
Interchangeable Spigot: comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.
3 Tier Extension: making it collapsible to a height of 120cm and fully extend to 400cm.
Adjustable Horseshoe Hinge Lock: ensures you can adjust the angle of the boom and multi-use as a boom or an extra Stand
Constructed from metal allows you to narrow the spread and shape of your lighting or use as a flag to reduce any light spill - comes included with a honeycomb grid to offer greater control by restricting the beam of light and 4 colour gels (Red, Yellow, Blue and translucent) to add some creativity to your lighting.
Dimensions: 94cm x 31cm x 28.5cm
Padded Interior: provides maximum protection to your gear, includes multiple dividers which allows you to separate your equipment in up to six compartments keeping them safe and secure during transit.
Strong Carry Straps: fixated around the bag allowing to move the roller case around when using heavier equipment along with two large castor wheels which can be used to wheel the case around.
The PIXAPRO® LED100D MKII Three Head kit with Boom and Barndoors are ideal to achieve a three point lighting set up (one main, one fill and the other as a hair or backlight) making it a great option for those looking for a powerful economical solution for both the hobbyist and the serious photographer, videographer or cinematographer, suitable for both Videos and Stills.
For more information on the products included within this kit please see the links below:
PLEASE NOTE: The LED100D MKII is Mains-Powered only and CANNOT be used with a battery.
This photo was taken using the LED100D MKII - By Ewan Matherslming-essentials
| Power Output | 100W |
| Luminous Flux | 10,000 lm |
| Brightness/Illuminance | 58,600 lux @ 50cm (10,800 lux @ 1m) |
| F-Stop (at 1m with Standard Reflector) | f/7.1 (1/80 Second ISO 100) |
| LED Type | Integrated LED Chip |
| Colour Temperature | 5600K |
| Beam Angle | 45° |
| CRI | ≥95 |
| Power Range | 10-100% |
| LED Life | Approx. 50,000 Hours |
| Remote Control | Yes (Sold Separately) |
| Voltage | 19V~24V |
| Dimensions | 275mm x 130mm x 220mm |
| Weight | 2.27kg (5lbs) |
| Accessory Mount | Bowens S-Type |
The LED100D MKIIs come supplied with standard UK 3-Pin plugs. However they can still be used in the USA or Canada by either using an adapter, or by switching the power cable for one with a US/Canadian styled plug. The LED100D MKII uses a standard IEC320 connection (as seen in the photo below), so you should be able to pick them up from any good electronics retailer.
LED100D MKII set to full power with the standard reflectors:
LED 100D MKII set to full power with a softbox:
Please Note: These figues are approximate, and may vary slightly depending on the size and design of your softbox
Please see the video below for instructions on how to do it.
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a questionFree UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
Pixapro LED100D Daylight lights in use
Some time ago I decided to change from using traditional studio flash units and move over to LED continuous lights. I wanted to get LED’s that were an equivalent to my old system so that I could carry on using my collection of soft boxes, beauty dishes and shoots. After doing some research and a visit to The Photography Show at the NEC I discovered Pixapro LED100D MKII daylight heads and these came with the standard ‘S’ type fitting – perfect!
I have been using this for over a year now and found them to be excellent for the work I do in the studio and on location. From time to time I arrange a shoot that is just for the fun of it so when I was asked by a model friend of mine for some pregnancy ‘bump’ shots I arranged a little something special. I contacted Charlotte Madhoodi, a make-up artist and body painter, and gathered some props to create a kind of woodland bower in the studio in which to sit the ‘Earth Godess’ Oona.
Here is the link of the picture at :http://pixapro.tumblr.com/post/138145888754/pixapro-led100d-daylight-lights-in-use
LED100D MKII
The lights are fantastic I saw it first on Ugly McGregor's channel on YouTube and then watched the review on Nisan Simantov's channel. I am using two of these as my keylight shot through a 1 stop scrim along with two Aputure 768 panels for fill. I wish I had seen these lights beforemore light for the same price
PIXAPRO LED100D MKII Daylight Balanced LED Studio Light Three Head Kit - With Roller Case (Improved Colour)
Great lights for small productions, pack shots, etc. The build quality is good and the possible accesories are a great adition
PIXAPRO LED100D MKII Daylight Balanced LED Studio Light with 90CM Umbrella Softbox & Stand (Improved Colour)
The "PIXAPRO LED100D MKII Daylight Balanced LED Studio Light with 90CM Umbrella Softbox & Stand" includes a "EssentialPhoto 260cm Spring Light Stand", a truly easy-open octogonal softbox 90cm well designed, well packed and easy to set in service or to fold back in its bag. The LED head is efficient and well made. I will post a review soon. Much reviews still exist, googlelize
Ewan Mathers has wrote an incredible review on the Pixapro LED100D Daylight lights when in use. He has changed from his usual and traditional Studio Flash Units to the Pixapro LED100D Daylight lights showing the effect it has created.
How to Convert your LED100D MKII or MKII+ for use on a Ceiling Mounted Rig System
Lewis McGregor review on the extremely popular PIXAPRO LED100D MKII. Everything you need to know!
See below for a guide to film noir cinematography on a budget with the PIXAPRO LED 100D MKII.
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.
