PiXAPRO
Autopole with 3 Pairs of Expansion Drive Shafts & 3 Pairs of Background Hooks
The PIXAPRO Autopoles can be used in conjunction with the 3x Background Expansion Drive and holder Bracket Set as a functional background support and grip system for your Seamless Paper Roll and Vinyl Backgrounds. The Autopoles can be placed between any wall or ceiling to create a secure support stand, ideal for photographers unable to keep their support systems constantly set up. The Background Expansion Drive is three sets of two adapters that allow you to attach a Paper or Vinyl Backdrop for permanent studio use. The 2x Background Hook Brackets can be attached directly to stands and then hold up the expansion drive and background, ideal for a quick and easy set-up. This equipment is ideal for a busy studio environment that need to change backgrounds quickly without issue.
Autopoles
Maximum Load: The autopoles offer a strong support for your backgrounds and backdrops, capable of holding a maximum weight of up to 15KG.
Unique Locking Mechanism: features a unique lever locking mechanism, designed to exert tension and pressure to make sure that they stay in place during use.
Maximum Height: Each Autopole can be steplessly adjusted in height between 2.35m and 4m in height, and as each Autopole is individual and not directly connected to the other, it is capable to set these as wide apart as required.
Rubber Suction Cup Grip: features solid rubber suction-cup in place to provide a non-slip grip to your ceiling, wall, or floor, with the design of each rubber-cushioned foot created to minimise any potential marks or damage during use
C-Clamp with Hook
Height: 6cm
Width: 6.5cm
Length: 17.5cm
Mount: These Brackets attaches securely by clamping to many different objects including light stands, tripods and autopoles.
Background Expansion Drive
Counterweight: The drive chain features an attachable counterweight, making sure that the background is held in place after adjustments have been made to prevent any unwanted movement.
Drive Chain: Durable and strong drive chain allows the background to be rolled and unrolled when required, ideal for making easier adjustments between different shoots.
Strong Durable Construction: can be used with any seamless paper and vinyl backgrounds that feature a core diameter between 45mm and 72mm whilst holding a maximum load capacity of 10KG.
The Background Hook Bracket can be securely clamped to many different objects including light stands, tripods and autopoles. With these 2 hooks, it can instantly turn a pair of your stands into background support system. It can be locked on any stands that have tube diameter up to 4cm, allowing for compatibility with a wide range of different stands and support systems.
For more information on the products included within this kit please see the links below:
- Unique secure locking system
- Autopoles Steplessly Extendable between 235cm and 400cm
- Designed to go vertically from floor to ceiling or horizontally from wall to wall
- Solid rubber-cushioned feet provide a non-slip grip and minimises marks and damage to walls, ceilings and floors
- Designed for use with Seamless Paper Roll Backgrounds, or Vinyl Backgrounds
- 2x 235-400cm Autopoles
- 3 Pairs of Background Hooks
- 3 Pairs of Background Drive Shaft
- 3x Drive Chain
- 3x Chain Counter Weight
Specifications
| Autopole Max. Height | 4m |
| Autopole Min. Height | 2.35m |
| Max Load Capacity Autopole | 15kg |
| Autopole Material | Metal |
| Autopole Tube Diameter |
(Upper Section) 40mm (Lower Section) 45mm |
| Max Load Capacity of Shaft | 10kg |
| Min. Core Diameter | 45mm |
| Max. Core Diameter | 72mm |
| Hook Material | Metal |
Q&A’s
- To extend the Autopoles, first pull the handle downwards, and the pull the handle outwards as shown in the video below. This will release the clamp mechanism. which will enable you to extend the pole to the length desired.
Once extended, please be sure to leave a small gap between the top of the pole and the ceiling or wall (about 1-1.5cm or so) which will give the Autopole enough room to extend and hold itself firmly in place once the handle has been returned to its “Locked” Position.
You can attach the feet to the bottom of the stand by slotting the thinner end of the cap into the bottom of the stand, here is a demonstration of how to do this:
Got a question of your own?
Ask our experts, we’ll do our best to get an answer to you by email as soon as we can.
Ask a questionDelivery & Returns
UK Delivery Rates
Free UK Standard delivery on orders over £150.00*
| Order Date (if received before 3pm) | Cost | Latest Expected Delivery Date |
|---|---|---|
| UK Saver Delivery (Orders over £150*) | FREE | 2-3 Days |
| UK Saver Delivery | £5.00 | 2-3 Days |
| UK Next Working Day | £8.00 | Next Working Day |
| UK Before 2pm Next Working Day | £18.00 | Before 2pm Next Working Day |
| UK Saturday Delivery | £30.00 | Saturday |
Returns
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
International Delivery Rates
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...
Check your countryPixapro products are used by
Be the first to write a review.
Manage your account & track orders
By signing in you agree to EssentialPhoto’s Terms & Conditions, and Privacy & Cookie Policy.