Included in this kit is everything that is required to offer a high-quality continuous lighting set-up. The LED200B MKIII is a 200W LED light that has Bi-Colour capabilities, allowing for lighting in either Daylight or Tungsten. It has an equivalent brightness to that of a 2,000W halogen light, whilst only using 10% of the power and running at a much cooler temperature. Also included in this kit is our 150cm Umbrella Softbox, which has a quick and simple set-up mechanism to help save time and effort, and helps to offer a more precise and accurate light source on the subject. Finally, is then 300cm Air Cushioned Light Stand, which is designed to help prevent any sudden drops which may cause damage to equipment, whilst being sturdy and durable enough to hold most common lighting with a range of modifiers attached.
The PIXAPRO LED200B MKIII is everything that you loved about the LED200B MKII, but with a re-designed heat-dissipation system, allowing for quieter operation. The LED200B MKIII is a 200W LED studio light which uses the latest in Bi-Colour High-Intensity Integrated LED technology with a brightness in excess of 16,000 lux at 1m, which is the equivalent brightness of a 2,000w halogen lamp, whilst using approximately 10% of the energy, and running many times cooler than a halogen light would since the LED200B is Bi-Colour, you can also vary the colour-temperature anywhere between 3200K (Tungsten) and 5600K (Daylight), without any loss of brightness.
Unlike traditional LED panels, where the bi-colour version is only half as bright as its single-colour counterpart, the LED200B MKIII is just as bright as the Daylight-only version, the LED100D MKIII throughout its full range of colour-temperatures. This means you will always have the equivalent of a 2K light available at all colour temperatures. The PIXAPRO LED200B MKIII has a Colour Rendering Index (CRI) of 97+, for super-accurate colour reproduction, and a Television Lighting Consistency Index (TLCI) rating of 97+ (which is the industry standard measurement of colour fidelity). This means that the LED200B MKIII is suitable for broadcast purposes, as well as other video and photography applications.
The LED200B MKIII features a new, completely re-designed heat-dissipation system. The LED200B MKIII’s chassis, which is covered in large ventilation slits, to maximise air-flow or more efficient heat dissipation. It also features a new built-in super-quiet electronic fan, with noise levels of less-than 18dB which is virtually inaudible… even when the LED200B MKIII is being used at its full power during extended shoots. This makes the LED200B MKIII suitable for use for any filming application.
The LED200B MKIII features a dimmer dial which enables you to control the brightness of the unit between 100-10% brightness in either intervals of 10%, for quick adjustments or 1% for more precise adjustments. The LED200B MKIII now features a new Memory function, which enables you to store and instantly access previous settings, for ideal for repeated lighting setups.
The LED200B MKIII features a USB port, which enables you to connect a 2.4GHz wireless radio remote receiver dongle, which enables it to be used with a wireless remote control (both dongle and remote are sold separately), allowing you to control up to 99 units with up to 10 different channels simultaneously. The LED200B MKIII uses the popular Bowens S-Type Bayonet mount, which enables it to be used with a with a wide range of lighting modifiers, including Softboxes, reflectors, snoots and Beauty Dishes etc.
The 150cm octagonal easy open umbrella softbox has everything you love in a traditional softbox but with the ease of use and setup of an umbrella. This uniquely designed softboxes are made with the on-location photographers in mind. The opening mechanism within the softbox is designed for quick and easy set-ups, opening like a regular umbrella, it expands into a square softbox. It will save you precious time, it also has well-constructed frame, which is very sturdy, particularly well-suited for outdoor and on-location use.
The interior walls have a highly reflective silver lining to bounce and reflect all the light towards your subject with no spill. Front and rear diffusers can be used as required for more precise positioning and feathering. The softbox also includes a removable honeycomb grid to better control light spill. The honeycomb grid, also called egg crate, will result in a narrower spread of light which can be positioned directly onto the subject without light spilling on the background. The grid is very simple to attach using the wide Velcro strips on the inside of the softbox. The honeycomb is 40mm x 40mm, which is also 40mm deep. The honey comb cells are much deeper than most and hold their shape extremely well.
The PIXAPRO 300cm Air-Cushioned stand with interchangeable spigot is perfect for use with heavier light and modifier combinations both the studio or on location. It is made from aluminium alloy makes it lightweight and strong. Our 300cm stand features a removable 5/8” steel spigot, with a 1/4” and a 3/8” thread enabling it to be used with almost any studio light currently available. The PIXAPRO 300cm Air-Cushioned stand features a thick a sturdy central column. The stand is also air-cushioned system which prevents sudden drops to minimise the risk of damaging your equipment or causing injury to yourself. The Stand can then collapse down to a length of 100cm for easy storage and transportation.
|Brightness||16,000 lux @ 1m|
|Adapter Input||AC 90-240V ~ 50/60Hz|
|LED200B MKIII Dimensions||360mm x 250mm x 315mm|
|LED200B MKIII Net weight||3.6Kg|
|Softbox Fitting||Bowens S-Type|
|Stand Minimum Height||125.5cm|
|Stand Maximum Height||300cm|
|Stand Footprint Diameter||Approximately 122cm|
|Maximum Loading Weight||7KG|
Free UK Standard delivery on orders over £150.00*
|Order Date (if received before 3pm)||Cost||Latest Expected Delivery Date|
|UK Saver Delivery (Orders over £150*)||FREE||2-3 Days|
|UK Saver Delivery||£5.00||2-3 Days|
|UK Next Working Day||£8.00||Next Working Day|
|UK Before 2pm Next Working Day||£18.00||Before 2pm Next Working Day|
|UK Saturday Delivery||£30.00||Saturday|
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 30 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...Check your country
Pixapro products are used by