The CITI100 PRO with S-Type Smart Bracket is perfect for anyone who wants to use a low power battery flash lighting unit with any Bowens S-Type fitting modifiers. The Pixapro CITI100 Pro (GODOX AD100 Pro) pocket flash, is an ultra-compact, ultra-lightweight 100Ws Battery-Powered Off-Camera strobe which is small enough to put in your pocket. The SMART Speedlite Adapter Bracket (Godox S2 Bracket) enables you to use small flashes in conjunction with your S-Type fitting modifiers. This is an ideal set-up for use on location for Portrait and Beauty Photography.
The Ultimate Pocket Flash: The CITI100 Pro is the ultimate strobe flash in terms of portability, weighing in at a mere 524g, the CITI100 pro can easily be thrown into your camera bag or carried around in your pocket.
TTL Compatibility: TTL Auto-Exposure, compatible with popular camera brands, including Canon, Nikon, Sony, Olympus, Panasonic, Fuji, and Pentax (compatible flash trigger required). It can also be used manually with other camera brands such as Hasselblad, Phase One and Leica etc.
High-Speed Sync Support: High-speed Sync (HSS) support with a compatible camera, which enable you to shoot shutter speeds higher than your camera’s sync speed.
Rechargeable Li-ion Battery: High-capacity 2600mAh 7.2V rechargeable Li-ion battery, which gives you approximately 360 Full-Powered flashes per charge and recycle-times of between 0.01 – 1.5 seconds.
Zoomability: Zoomable, which enables you to adjust the beam angle of your light anywhere between 28mm and 85mm. This gives you the option of having widespread light coverage, or a small pool of light like a spotlight.
Magnetic Modifier Mount: Magnetic modifier mount which enables you to swap modifiers quickly and easily with very little fuss.
ONE System Compatible: PiXAPRO ONE System, meaning it can be used in conjunction with other flashes in the Pixapro Ecosystem, including the Pixapro Speedlites, Battery flashes, and even the mains-powered studio flashes. The CITI100 Pro is also compatible with the Pixapro ST-III, ST-III Plus and ST-IV flash triggers.
Firmware Updates: Supports firmware updates, which enables tweaks and new features to be added as they become available in the future, ensuring that your light has all the features.
Bowens S-Type Mount: This Adapter Bracket allows you to mount a range of different Bowens S-Type fitting modifiers such as Softboxes, Beauty Dishes, Reflectors etc.
Removable Rubberised Blocks: These blocks enable you to adapt the bracket to be compatible with a selection of different speedlites and compact flash units.
Tiltable Bracket: The bracket features a tiltable mount, allowing you more freedom and control of the positioning of your light.
Umbrella Slot: Features a built-in slot to hold an Umbrella shaft in place during use.
This kit is a perfect bundle to allow you to use any Bowens S-Type fitting modifier that you may have with our 100W battery powered compact flash lighting unit, perfect for location use.
For more information on the products included within this kit please see the links below:
|Colour Temperature||5800 ± 200K|
|Zoom Range||28mm-85mm Manual Zoom Control|
|Recycle Times||0.01 - 1.5 Seconds|
|Power Range||1/1 - 1/256 (1/3rd and 1/10th Stop Increments)|
|Power Source||7.2V/2600mAh Battery (Same as GIO1)|
|Number of Flashes||Approx. 360 Full Powered Flashes Per Charge|
|LED Modelling Bulb Output||1.8w SMD LED – 10 Brightness Levels|
|Flash Delay||0.01 - 30 Seconds|
|Flash Modes||TTL (Canon, Nikon, Sony, Olympus, Panasonic, Fujifilm, Pentax) / M / Multi|
|High Speed Sync||Up to 1/8000s|
|Second Curtain Sync||Yes|
|Flash Exposure Bracketing / Flash Exposure Compensation||Can be adjusted via the Trigger|
|Stroboscopic Flash Mode||Up to 90 times, 99Hz|
|Radio Frequency||2.4GHz (Compatible with PiXAPRO One System)|
|Work Range||100m Transmitter in Open Range|
|ID||01 - 99|
|Slave Modes||Manual Slave Modes S1 & S2|
|Other Trigger Methods||3.5mm Sync Port, Wireless Control Port|
|Dimensions||Ø76mm x 120mm|
|Net. Weight||542g (Including Battery)|
Free UK Standard delivery on orders over £150.00*
|Order Date (if received before 3pm)||Cost||Latest Expected Delivery Date|
|UK Saver Delivery (Orders over £150*)||FREE||2-3 Days|
|UK Saver Delivery||£5.00||2-3 Days|
|UK Next Working Day||£8.00||Next Working Day|
|UK Before 2pm Next Working Day||£18.00||Before 2pm Next Working Day|
|UK Saturday Delivery||£30.00||Saturday|
EssentialPhoto is committed to the provision of quality and reliable products and outstanding customer service. Buyers are entitled to cancel the order and return the goods within 28 working days for a full refund of the purchase price of the goods.
We are able to ship from our UK based warehouses to many countries around the world. Click below to check shipping rates to your country...Check your country
Pixapro products are used by